SBR help

[Z7_Matt]

what length of barrel are you going with

12.5

it measures 10.75" OAL

I wonder what the over all length of the noveske nsr is?

[Kankles]

12.5

I wonder what the over all length of the noveske nsr is?

Not sure.. I'm sure there are a few on here with them that could give you a measurement

[Z7_Matt]

Not sure.. I'm sure there are a few on here with them that could give you a measurement

I started a thread. Hopefully someone will have an answer. I'm going to give the efile a shot using the provided link. If I get stuck in going to hit you up Rito!

[Kankles]

I started a thread. Hopefully someone will have an answer. I'm going to give the efile a shot using the provided link. If I get stuck in going to hit you up Rito!

No problem Matt, text me if you need anything

[stxhunter]

For the overall length my lawyer said to use 18.5 plus barrel length.

[Mike D]

I filed all of mine at 26.5" total length.

That covers me down to an 8" barrel length.

[Z7_Matt]

I filed all of mine at 26.5" total length.

That covers me down to an 8" barrel length.

Good thinking Mike

[Coach W]

I filed all of mine at 26.5" total length.

That covers me down to an 8" barrel length.

I was under the impression the OAL is the length of the lower and the upper you registered it with... So if it was being scrutinized you put the original upper on your registered lower and the math should all make sense...

If you have to be able to put the original upper on to match the form why wouldn't you also need to be able to put it back in the "original configuration" as written on your form to measure the OAL?

[Mike D]

Barrel length and caliber is more critical than overall length. So many different stock configurations that could affect overall length.

[Kankles]

That's for sure... My OAL length dropped 2" when I put the LWRC UCIW stock kit on