Ford Factory Door Keypad Code

[sierracharlie338]

So Manuel is the suspect?

Sent from my SM-G930V using Tapatalk

Lmao darn that guy!!


Sierracharlie out…

[Graysonhogs]

can you disable it? I NEVER use mine.

[Stolle]

So Manuel is the suspect?

Sent from my SM-G930V using Tapatalk

Card in the owners Manuel

If that was the case I wouldn’t have started this thread. The cards are not in my owners Manual like I stated in my original post.


Sent from my iPhone using Tapatalk Pro

[Stolle]

can you disable it? I NEVER use mine.

I can unplug the keypad if I take the door panel off. I might go this right. Then if the jimmy the door again the alarm will go off at the least.

A $1 says he doesn't know the factory code. Very few people do.



Sent from my SM-G955U using Tapatalk

You my friend are a dollar richer.

Daggum it sounds like this is a regular occurrence for you. Sorry to hear that. I hate a thief.

I don’t think it’s just me. I think it’s common for everyone that lives/works in the Houston area.



Sent from my iPhone using Tapatalk Pro

[cj7zrcool]

I hope I'm misunderstanding all this. I know that you can add codes, but if my entry code is the original factory code, it can never be overridden or disabled unless you pay $500ish for a new BCM? That's ludicrous.

[Quackerbox]

If that was the case I wouldn’t have started this thread. The cards are not in my owners Manual like I stated in my original post.


Sent from my iPhone using Tapatalk Pro

My punch line. You missed it.

So Manuel is the suspect?

Sent from my SM-G930V using Tapatalk

[Stolle]

I hope I'm misunderstanding all this. I know that you can add codes, but if my entry code is the original factory code, it can never be overridden or disabled unless you pay $500ish for a new BCM? That's ludicrous.

That’s what I’m being told.


Sent from my iPhone using Tapatalk Pro

[SAC]

That’s what I’m being told.


Sent from my iPhone using Tapatalk Pro

If you are wanting to try the $139 option, I have found a way to retrieve the factory code without dealer assistance. Just so you could verify that it didn't work and not pay them.

Going to test this operation now.

[Stolle]

If you are wanting to try the $139 option, I have found a way to retrieve the factory code without dealer assistance. Just so you could verify that it didn't work and not pay them.



Going to test this operation now.

The video above explains how to retrieve it. Both key fobs in the key fob holder. Is that what you are trying?


Sent from my iPhone using Tapatalk Pro

[SAC]

The video above explains how to retrieve it. Both key fobs in the key fob holder. Is that what you are trying?


Sent from my iPhone using Tapatalk Pro

Yes. I've done research all morning and I have not come across anything about resetting the factory code.

[Stolle]

Yes. I've done research all morning and I have not come across anything about resetting the factory code.

Sure wish they would change it or send the owner the code via email or anything besides leaving it in the owners manual.


Sent from my iPhone using Tapatalk Pro

[SAC]

Sure wish they would change it or send the owner the code via email or anything besides leaving it in the owners manual.


Sent from my iPhone using Tapatalk Pro

I have added this to the list of things that Ford does that make "SMH"

[sierracharlie338]

I have added this to the list of things that Ford does that make "SMH"

As a person who has only owned fords that list is plenty long brother.


Sierracharlie out…

[sierracharlie338]

I hope I'm misunderstanding all this. I know that you can add codes, but if my entry code is the original factory code, it can never be overridden or disabled unless you pay $500ish for a new BCM? That's ludicrous.

I believe you can ADD an additional code but the factory code can’t be deleted or changed unless you buy a new BCM, is the way it has been explained to me by many people who would know a trick if there was one.


Sierracharlie out…