Fellow told me you could use plastic vians and put a R/W helical on an arrow. I know it's not traditional looking but if it saves me 20 bucks a pack I'm all for trying it out. Any of y'all try it?
Announcement
Collapse
No announcement yet.
Helical on gains?
Collapse
X
-
Originally posted by BIG_B View PostThnx, I stick with what I got right. Got enough issues I need to work on first...lol. Birch I still need to come up and let you share some your knowledge with me.
Come on up and we'll see what we can see. I have an alligator hunt next week (m-th) but am open most other times.
Bisch
Comment
-
Patience is a virtue, or so they say.
It really isn't that hard to shoot vanes off the shelf, you just have to go at it with certain things in mind.
The process I have found to work 100% of the time is this:
1 - Build your strike plate out, so that you have only the amount of shelf that you need holding the arrow with no excess. This moves the arrow out, and away which reduces
contact area of the fletching.
2 - Place a piece of leather, wood dowel, or other material under the shelf material at a 90 degree angle to the strike plate, and holds the arrow about 1/4" higher than the actual shelf. I have found this to work best when placed directly above the deepest area
of the throat of the grip.
3 - Step one will require you to weaken the spine of the arrow some. How much can only be determined by tuning, and can usually be achieved by adding a little point weight.
These 3 things will give more clearance all around, and will better utilize paradox
to maintain the clearance throughout the arrow pass.
Once this is done, both vanes and feathers will shoot the same, and you will in all likelihood have a more forgiving setup to shoot.
Rick
Comment
Comment