Would taking the removing the action from the stock change the zero on a rifle? I have a Tikka t3x that I might add a Mountain tactical spring to. The action is sitting in s B&C stock and I can screw the action down to the same foot pounds with my fat wrench but don't know if it will change the zero of the rifle.
-
-
I can’t imagine that it would change but you can always verify it afterwards and let us know.
Sent from my iPhone using Tapatalk Pro -
It certainly can. Shouldn’t be much but could be enough. If the stock is bedded there is less of a chance.Comment
-
If it is a free floated barrel I think you should be good if you torque the same make sure it sits in the receiver mounting blocks the same. Try it and see.Comment
-
Action has been skim bedded and barrel is free floated. Will verify and let y'all knowComment
Comment