Suppressor POI issue

[Chootem]

The sps is factory threaded. I think...

[meltingfeather]

it's factory threaded, but it is a Remington.

OP- pull your can apart and inspect it.
Sandman page

700 SPS tactical page

[Saltyag15]

My Sandman S was hitting 5” low and 2” right, but my groups were slightly better than before. So after re-zeroing, it was a big success! Sorry to hear about that crazy impact difference. Something is definitely wrong somewhere

[Leddy]

Thanks guys for input.

The gun groups well with QD mount only. POI does not change until Suppressor is added.

I will inspect for baffle strikes as well and get back. After quick look at the range this did not appear to be the case.

Gun was factory threaded. I know, I know, but by Remington. This is what I was thinking.

Will send to gunsmith and have him check threads and remount QD.

[bermise]

Try different ammo

[pervis]

Something is def not right. I have multiple dead air cans. Your groups should be nice and tight. I always sight w the supreasor on bc they stay on the gun. I dont move the can from host to host. I just buy another can. The poi you are experiencing is not at all normal. Are you hearing any weird noises when the bullet goes thru the can, like the bullet spiraling at a high rate, or hearing a baffle strike? Is this your first can so you would know what to listen for? Do u also have the can on the qd correctly and hand torqued all the way down ratchet style?