Rem 700 5R detachable mag upgrade?

[Cajun Blake]

One 66, I've got the H&S stock not a B&C. I'm sold on the PTG I hope it will drop into the H&S. I'm ordering tomorrow. Thanks for all the help guys.

When you order , ask to speak with Dave Kiff

Let him know what stock you have and what BM you want , he will take care of your needs

[yanta61]

I have a PTG BDL drop in and it DID NOT drop in. I have a B&C A3 stock and had to inlet the stock some to get to fit. It also will not cycle rounds. The bolt rides over the top of the shell. The feed lips on the mag does not match the receiver.

Read up on it here. http://forum.snipershide.com/s4-snip...ington-sa.html

Dave said something about have 2 different length of clips that hold the mag...you might call him and see which clip you have and maybe get the longer one...Which will pic up the mag higher into the action....

[yanta61]

When you order , ask to speak with Dave Kiff

Let him know what stock you have and what BM you want , he will take care of your needs

Blake,

Do you have any of the BDL drop in's or did you get the m5 and mill out the stock?

[Cajun Blake]

Blake,

Do you have any of the BDL drop in's or did you get the m5 and mill out the stock?

I have 2 Manners stocks that were inletted for BDL's

called Dave, told him what I needed, and both DM's fit fine.

* as noted above, I shoot single shot so I haven't purchased a magazine and I've never had to cycle bolt to confirm if any feeding / ejecting problems