Announcement

Collapse
No announcement yet.

Grouping help.

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #31
    Originally posted by SB09 View Post
    Bow type is in the original posts. String age is two posts above yours. Not factory strings.

    We know there in above post. But very few people read the complete post. They scan. I did the same thing. You posted most info in your first post and I came right back and ask.

    People are here to help. But weather you mean to are not a smart *** response can get where people won't answer you any more

    I do that all the time. I always look at who's posting. You will start remembering who it is.

    Sorry about the hand. Could have been your face.

    Comment


      #32
      Originally posted by enewman View Post
      We know there in above post. But very few people read the complete post. They scan. I did the same thing. You posted most info in your first post and I came right back and ask.

      People are here to help. But weather you mean to are not a smart *** response can get where people won't answer you any more

      I do that all the time. I always look at who's posting. You will start remembering who it is.

      Sorry about the hand. Could have been your face.
      I guess I don't see where the smart*** comment is in my post. You seem upset with me for some reason. The very least a person can do is read the entire first post, which contained the answer to the first question. Scanning the rest of the thread, I understand, but the initial post too? How can a person give an accurate opinion if they won't even read what the original post says? Don't you think it would contain vital information that goes in to answering the question asked? I just was providing the person asking a source to answer his questions, my bad.

      If I wanted to be a smart*** I would've done something like this....

      Its they're, not there. It's more, not most. It's whether, not weather. It's or, not are.

      If you don't want to see my posts there's a block button, use it. I simply tried to help just the same as anyone else. Then, when you stated your opinion on the subject I simply explained my reasoning for what I posted. If that's viewed as being a jerk, nothing I can do to help.

      I think your own feelings about me were the reason you read that as being a smart*** comment. That wasn't my intention.

      I tell you what. I'm done here. You don't want me here obviously so I'll just go somewhere else. Sad I don't get to talk with and learn things from all the other members over you getting upset I gave a different opinion on how to fix his broadhead point of impact.
      Last edited by SB09; 09-16-2015, 05:51 AM.

      Comment


        #33
        sb09. I have no clue who you are. I have no feelings toward you good or bad. Nor do I have an issue with you I was just making a statement. It looks like I have hurt your feelings. Sorry. But you need to get thicker skin there bud.


        I don't care if you post or not. It doesn't matter if I post or not.

        I'm guessing I hurt your feelings by saying the chart is bad. People use this chart all the time. It's old. It was derived from recurve shooting. It's wrong.

        First part is it says stiffer reaction. Move rest. You do not fix a stiff or weak by moving a rest. This is completely wrong. That was my point on that post.


        Now I was just making point. I don't see a lot of the old timers on here helping anymore. And this is the type of reasons.

        Again Suck it up and get over it. At 26 yrs old you would think your feelings would not get hurt so easy. I guess that is an advantage of getting old. We or I don't care I'm just getting very blunt. No reason to beat around the bush.

        432-967-3706.
        Last edited by enewman; 09-16-2015, 07:06 AM.

        Comment


          #34
          Originally posted by wes122984 View Post
          Set the rest to center shot ~ 13/16 and with the arrow running right through the berger hole.

          Set nock level

          shoot bh and fp.
          adjust nock point for up and down flight until they are in line.

          adjust yokes for left and right misses.
          So your saying to set the center shot and instead of moving the rest left/right for broadhead tune, adjust the yolk? I'm asking because I'm having similar issues with my hoyt crx35. I changed my arrow setup and I got bh and fp hitting together, but now my arrows are kicking/fish tail to the left pretty good. This is my first hoyt and my first dual cam bow. So in trying to learn how to properly tune it.

          Comment


            #35
            Tagged for later

            Comment


              #36
              Originally posted by SB09 View Post
              There's a ton of reasons strings can break. Where exactly did they break? That's why when you realize there's a tuning issue you've got to shut it down and get things looked at before you shoot another arrow.
              The loop that anchors on to the peg on my top can is where it broke.
              Question, when y'all say it's a set up issue with my bow. What exactly are you meaning? Knock point to high? Rest of of alignment? Or something deeper rooted than that?

              Comment


                #37
                Something deeper your cables have stretched an may have been running on something or something similar to that

                Comment


                  #38
                  Ok well I got quoted $150-175 out the door for new strings and cables. That sound okay?

                  Comment


                    #39
                    Originally posted by ShaftEm View Post
                    Ok well I got quoted $150-175 out the door for new strings and cables. That sound okay?
                    Does that include getting bow into spec. Ata, brace , cams in sync and lb is good at max and if yokes set at no lean at full draw. Then yes.

                    Comment


                      #40
                      Sell hoyt, buy Mathews!!

                      Comment


                        #41
                        I messaged the shop to ask. Does seem pretty high considering last time I got replace I went to Bellville and was out the door at under a $100 but I do not believe they checked to make sure my bow was to specs

                        Comment


                          #42
                          Originally posted by MONSTERKEN View Post
                          Sell hoyt, buy Mathews!!

                          Looking to buy a z7 come spring

                          Comment


                            #43
                            Just curious man y don't you you start to buy a press an stuff like that an learn to tune your own bow. I did an it's very rewarding to do it all yourself

                            Comment


                              #44
                              Originally posted by enewman View Post
                              We know there in above post. But very few people read the complete post. They scan. I did the same thing. You posted most info in your first post and I came right back and ask.

                              People are here to help. But weather you mean to are not a smart *** response can get where people won't answer you any more

                              I do that all the time. I always look at who's posting. You will start remembering who it is.

                              Sorry about the hand. Could have been your face.

                              Soooooo what your saying is every other post should be how old his strings are??? Because that question has been asked a few times. I understand scanning a thread that is a few pages long, but this one was only a page.

                              Comment


                                #45
                                I'm slowly getting there. Have a vise and arrow saw and a whole room dedicated to archery. Just to close to the season for me to try and start learning now. I'd rather pay the money for it to be done right and start learning myself this spring.

                                Comment

                                Working...
                                X