Mathews cam rotation

[red]

How dead center in the cam timing hole does the string need to be? Got my new string on, settled in, axle to axle dead set, peep, rest, paper tuned all done. Trying to tell my OCD that this is close enough to center...

[BowTech2010]

That'll work just fine. No need to worry

[bowhuntntxn]

That is close enough that it will tune and shoot just fine IMO. You should have taken a picture of it before you changed your string and see how close you got!

[randal]

No problem

[enewman]

None if you have to pay to get it fixed. If you can do it your self fix it. Or it will drive you crazy.

[gatt40]

Close enough if you can't fix it yourself

[old killer]

When the bow is that close, you need to work on the loose nut behind the string.
Use the D.A.S. method. Draw, aim, shoot, cut out out the BS and concentrate on the aiming.
Don't make archery complicated. It has to be fun.

[Pistol]

yeah, what George said (old killer)!!

[Traildust]

I'd put 1 1/2 more twists in it

[txdukklr]

I would be more worried about the arrow in the center of the dot then that.

That looks perfectly fine to me

[Floor Man]

It's fine. They will tune fine as long as it is anywhere in the hole. My tournament bow actually shoots better a little over rotated.

[JerryR]

Add 1 twist to cable and it will be spot on. If the cable isn't perfectly center nock travel isnt perfect. Never accept good enough, because the bow was designed to be setup spot on. Just my opinion.

[lovemylegacy]

Bullseye!