How dead center in the cam timing hole does the string need to be? Got my new string on, settled in, axle to axle dead set, peep, rest, paper tuned all done. Trying to tell my OCD that this is close enough to center...
That is close enough that it will tune and shoot just fine IMO. You should have taken a picture of it before you changed your string and see how close you got!
When the bow is that close, you need to work on the loose nut behind the string.
Use the D.A.S. method. Draw, aim, shoot, cut out out the BS and concentrate on the aiming.
Don't make archery complicated. It has to be fun.
Add 1 twist to cable and it will be spot on. If the cable isn't perfectly center nock travel isnt perfect. Never accept good enough, because the bow was designed to be setup spot on. Just my opinion.
Comment