which bow target

[JT12]

ok guys so I've used Rinehart targets in the past and the seem to hold up the best but gets old having to pry arrows out of it. I bought "the block "and after two weeks of shooting arrows are already burying up to the vanes. so I decided to try bulldog targets they have a lifetime warranty but a few weeks shooting it arrows are nearly blowing thru it and ripping off vanes. I've contacted them to see what they say about it but in the meantime what have y'all found to work the best for high volume shooting? looking at morrell high roller or the Rhinehart again. thanks

[Bucknaked]

https://www.morrelltargets.com/collections/all-targets/products/big-high-roller

I purchased this one last year and have sent over a thousand shafts to it and it is still in great condition. Easy to pull shafts from also.

[JT12]

https://www.morrelltargets.com/colle...ig-high-roller

I purchased this one last year and have sent over a thousand shafts to it and it is still in great condition. Easy to pull shafts from also.

any issues with outserts? i think thats what killed my bulldog target

[Bucknaked]

any issues with outserts? i think thats what killed my bulldog target

I don’t use them so I’m no help there

[BLACKFINTURKEY]

Blob target. Extremely heavy and ugly but mine has taken thousands of broadheads and still going strong after 5-6 years. You do have to get an arrow puller for field points.

[JT12]

Blob target. Extremely heavy and ugly but mine has taken thousands of broadheads and still going strong after 5-6 years. You do have to get an arrow puller for field points.

ill check them out, thanks!

[BowHuntTexas]

My buddy and I shoot a lot as well and were going through about a target a month. Bought the high roller and so far, it seems to be holding up better. Arrows come out by hand fairly easy. I think it helps being able to rotate it so many different ways to keep from wearing out a certain area.

[Brush Country]

I’ve done the same with my High roller target as well

[diamond10x]

Layered foam targets are the best bang for your buck IMO. The 18" and 22" 4 sided ones from field logic are pretty dependable and not a pain to deal with. I shoot a lot more than the normal person but I wouldn't say I shoot A TON.

I have heard good things about the morrell high rollers and have been wanting to get one. I would have already bought one if I didn't have to pay for shipping.

[txheartshot]

https://www.morrelltargets.com/colle...ig-high-roller

I purchased this one last year and have sent over a thousand shafts to it and it is still in great condition. Easy to pull shafts from also.

This. Best target I’ve ever owned, and I’ve had quite a few.

[Rubi513]

Blob target. Extremely heavy and ugly but mine has taken thousands of broadheads and still going strong after 5-6 years. You do have to get an arrow puller for field points.

I am still shooting the Blob I bought in 2016. It stays outside. Arrows used to be tough to pull, but are fairly easy now.

[JT12]

just an update I contacted bulldog targets and they sent me a new face kit to rebuild my target as well as a brand new target. if you arent using outserts if think this target will last you a long time

[Trifecta Rob]

Matrix

buy once cry once!

[Bucknaked]

Matrix

buy once cry once!

That cube M3 is about what I paid for my morell! I really like that m3

[Rubi513]

Matrix

buy once cry once!

I don’t see that lasting as long as a blob. You’re not moving a blob around that easily.