Did my own test with my bow and the arrows i use. The bow is a Mathews Triax and the arrows are Eastern Axis 5mm. The arrow leaves my bow counter clockwise. I fletched for both right and left helical. Shot field tips and broad heads. At least out to 40 yards I saw not real difference. I was betting the left helical would be more consistent and accurate, it was not. No real world difference, at least to my bow and the arrows in shoot.
Announcement
Collapse
No announcement yet.
Right or Left fletching
Collapse
X
-
I did mine left, because why not. There's been a lot of testing and nobody can tell the difference. Some argue that the fletching spinning reverse of the natural rotation is actually better as it immediately creates more drag to stabilize the arrow and then let's up after the spin changes direction.
Comment
-
Originally posted by justletmein View PostI did mine left, because why not. There's been a lot of testing and nobody can tell the difference. Some argue that the fletching spinning reverse of the natural rotation is actually better as it immediately creates more drag to stabilize the arrow and then let's up after the spin changes direction.
Does an unfletched arrow spin?
Comment
-
Practically it's not worth worrying about it. However, I'm not practical nor do I ever leave well enough alone. So I always match helical/offset direction to the natural rotation of the arrow. My factory PSE strings were left, my Phantom strings are right. My OCD just can't deal with the arrow is spinning one way, and the fletching has to stop that motion and reverse it. That probably all happens in inches after leaving the string... but I know its happening and can't let it go.
- Likes 2
Comment
-
I went down this rabbit hole last summer with my setup. I agree that it's probably not worth worrying about for most people, and that most people can't shoot the difference.
This video helps see it in action with a high speed camera, with bare shaft, and right and left helical.
I don't like that it happens, so I match the natural rotation. The concept of it pausing in flight, then changing rotation direction, then actually seeing it happen, was too much for me not to change it to match natural rotation.
- Likes 1
Comment
-
After seeing the video, it would seem to me that you would want the fletching to counter the natural rotation so that the arrow completely clears the bow before rotating any amount. If the arrow starts spinning before the fletching clears the rest, you might have collision even with a drop away if you have a narrow shelf and tall fletching or slightly underspined arrows.
Comment
-
Originally posted by 100%TtId View PostAfter seeing the video, it would seem to me that you would want the fletching to counter the natural rotation so that the arrow completely clears the bow before rotating any amount. If the arrow starts spinning before the fletching clears the rest, you might have collision even with a drop away if you have a narrow shelf and tall fletching or slightly underspined arrows.
Comment
Comment