Sight question

[Keithb]

In fact, I would center pins before I increased my DL.
You don't have to shoot circle on circle if you are able to center pins well, this is how most of us learned to shoot.

What exactly do you mean center the pins?

[Razorback01]

I'm not sure what your setup consists of, but the comment below would make me think your rest may be too far to the left. Have you tried a walk back tune (5,10, 15 yards) to make sure your rest is centered with the bow?


I've determined that I'm on my last set of holes for adjustment to move my sight away from the riser

[Ledbetter Buck]

I would try 1/4" peep. I personally like to be able to see sight ring and center up on it. It will also improve low light visibility. Just my 2 cents

[Ledbetter Buck]

I think G5 also makes a 5/16". Was a little to big for me though

[Keithb]

I'm not sure what your setup consists of, but the comment below would make me think your rest may be too far to the left. Have you tried a walk back tune (5,10, 15 yards) to make sure your rest is centered with the bow?


I've determined that I'm on my last set of holes for adjustment to move my sight away from the riser

What I meant on that, was to move my sight further forward, away from the nock side. I need more distance between me and the sight, or a larger peep, if that's what you're referring to.

I have walk-back tuned and it's dead on. My consistency is on, I just can't center my sight within my peep which would improve consistency.

[Keithb]

My wife picked up a RAD 1/4" self-aligning peep and I was able to pop the old out and new in although a little different, with the help of a friend's portable bow press. I can now see the entire sight ring, but lowered my shot by about 4". lol I had to lower my sight about 2-3 clicks to compensate although it was pretty windy.