CNC router projects! who has one?

[TN_boy]

.

Sent from my SM-G986U using Tapatalk

[TN_boy]

12"x16" wide x 1.5" thk walnut with blue mica epoxy

Sent from my SM-G986U using Tapatalk

[CharlieM]

That's awesome!

[mmoses]

Looking good!

Sent from my Pixel 4 using Tapatalk

[TN_boy]

12" diameter

[Drewboy22]

Made some Christmas ornaments. They are roughly 4x4 and 7/16 thick.

That is a great idea!!

[TN_boy]

Made some Christmas ornaments. They are roughly 4x4 and 7/16 thick.

[TN_boy]

Some more knick knacks

[TN_boy]

I have a Laguna IQ. Wanted a small machine capable of production. I can run 1/2" dia bit at 1/4" deep @ 100ipm in mesquite and Pecan hardwood. The kicker is making sure that you have a good clamping system to keep parts from moving and/or vibrating.

Machine weighs 400lbs which is mostly in the frame and base. This was a must so that deflection wasn't an issue. Found it on Craigslist for $3k barely used from an older gentleman. It paid itself off in about 60 days.

Sent from my SM-G986U using Tapatalk

[djc]

A few of my flags.

[djc]

I'm a machinist by trade, I'm thinking of getting a router to play with when I retire. What are your favorite machines and why? Thanks!

[kparker158]

Well I bought my gf a Glowforge and I must say the CNC Router is the better investment Lol. Something that takes 2-3 minutes to engrave/cut on my router takes about 30-45 minutes on the glowforge. They definitely compliment each other well.

[Drewboy22]

I added some epoxy to my bottle opener this eve

Sent from my SM-G986U using Tapatalk

That is a great idea!! Good Job

[TN_boy]

I added some epoxy to my bottle opener this eve

Sent from my SM-G986U using Tapatalk

[mmoses]

very good stuff!