CNC router projects! who has one?

[ctom87]

I have a project where a template would be helpful. Is there anyone in dfw that could help route a template for me that I could use a straight edge router bit on?

[mmoses]

Working on some v carving. New 90 degree v bit really makes that lettering look awesome

Sent from my Pixel 2 using Tapatalk

[Drewboy22]

I'm going to make a double fold up door over the computer as well as a dust door f poi r the cabinet, but this is what it looks like when you're zeroing the machine.

Sent from my SM-A600AZ using Tapatalk

Nice work!! That light is going to be real helpful!

[mmoses]

weird for some reason Ive stopped getting notifications from this thread.

I like it!!! Im probably going to steal that!

[Texastaxi]

This is what it looks like pushed out of the way.
I'll put a latch in both directions to hold it in place.

Sent from my SM-A600AZ using Tapatalk

[Texastaxi]

I'm going to make a double fold up door over the computer as well as a dust door f poi r the cabinet, but this is what it looks like when you're zeroing the machine.

Sent from my SM-A600AZ using Tapatalk

[Texastaxi]

Glad it up and running!!! distractions make life interesting!

I've built a little side cabinet to hold my laptop.
I think you're gonna like it ... I'll post some pictures when I finish it.

[mmoses]

I partially funded Martin's upgrade ... kinda ...

After a few computer hiccups, I got his old machine up and running, and cut a few pinewood derby car chassis. I'm already addicted to playing with this thing and pushed a few of my "real" projects aside to play with it.

I don't know if this is good or bad!

Glad it up and running!!! distractions make life interesting!

[cva34]

Wow!!!!

[Texastaxi]

I partially funded Martin's upgrade ... kinda ...

After a few computer hiccups, I got his old machine up and running, and cut a few pinewood derby car chassis. I'm already addicted to playing with this thing and pushed a few of my "real" projects aside to play with it.

I don't know if this is good or bad!

[Drewboy22]

Well my CNC got a little bigger. XXL with the z plus.

Sent from my Pixel 2 using Tapatalk

Upgrades are always nice!! I have 2in risers and a z upgrade that needs to be installed

[Drewboy22]

Awesome work you all.

I recently got an X-carve but haven't had time to play with it. What small/easy projects do you folks recommend to learn on??

Great news! You will have some fun now!

[mmoses]

Awesome work you all.

I recently got an X-carve but haven't had time to play with it. What small/easy projects do you folks recommend to learn on??

Awesome!! you just got to just jump in.

[Pedernal]

Awesome work you all.

I recently got an X-carve but haven't had time to play with it. What small/easy projects do you folks recommend to learn on??

[mmoses]

Well my CNC got a little bigger. XXL with the z plus.

Sent from my Pixel 2 using Tapatalk