CM Flatbed for Regular Dually Bed?

[MontagueMech]

It’s up in Bowie, but you’re right, and they have a bunch of’em.


Sent from my iPhone using Tapatalk

Thanks. I forgot exactly where it’s at.

[LFD2037]

Make sure they took a pickup bed off to put that flat bed on it. There are 2 different width of duallys, the slightly narrower ones come with no bed on them.

It was built as an actual truck and not a cab and chassis. Thanks for the heads up though. I ran the VIN to make sure.

[flyinstroke]

I would check with any place that installs flatbeds. Our local place here in Wharton has a few take off beds they keep around, but they don't last long. Body shops buy them up pretty quick.

[LFD2037]

I’ve called the few around me with no luck so far.

[shwacker1911]

See ff the sticker is still under the lp there should be a model number on it normally they fit more then one truck. If you can get it I can see what it fits would help you sell it faster and probably for more depending on the model

[Notaguide]

Quinton & Sons in Gatesville Is worth contacting for a stock bed. If it was a 4th gen, I know where one is sitting.

[LFD2037]

Quinton & Sons in Gatesville Is worth contacting for a stock bed. If it was a 4th gen, I know where one is sitting.

2014 is 4th gen, correct? What color is it? Thanks.

[MontagueMech]

Flusche Enterprises in Muenster on 82 sells flatbeds and they have some fresh takeoffs. I know they have one from a Ford dually and I saw at least one other pickup bed but not sure on the make. Might have others. Been too busy to stop and look closer.

You might call and ask if they could help you locate one. Muenster has some really nice folks there that like to help others.

https://fluscheenterprises.com/

[Notaguide]

2014 is 4th gen, correct? What color is it? Thanks.

My mistake. It's a 5th gen (2020) white in color.

[LFD2037]

See ff the sticker is still under the lp there should be a model number on it normally they fit more then one truck. If you can get it I can see what it fits would help you sell it faster and probably for more depending on the model

Part # 1520917 is behind the license plate. Thanks!

[bboswell]

Part # 1520917 is behind the license plate. Thanks!

I'm trying to cross that PN but not having any luck.

Anyone here have resources to check other trucks this will fit?

[Mr. Whiskers]

Have a perfect bed on a white 2013 and looking for a flat bed

[shwacker1911]

So it is a SK 8'6/97/58/42 sk is the model it is a 8' 6" bed so a long bed pickup. "Not a cab and chassis truck" in order for it to fit the truck it needs to have a cab to axle measurement of 58" so from the back of the cab to the center of the rear axle. With a frame width of no more then 42" should fit dodge and some ford models but you would have to measure the truck you plan on using. Look up cm bed" SK86975842"

[shwacker1911]

I'm trying to cross that PN but not having any luck.

Anyone here have resources to check other trucks this will fit?

See my last post

[bboswell]

So it is a SK 8'6/97/58/42 sk is the model it is a 8' 6" bed so a long bed pickup. "Not a cab and chassis truck" in order for it to fit the truck it needs to have a cab to axle measurement of 58" so from the back of the cab to the center of the rear axle. With a frame width of no more then 42" should fit dodge and some ford models but you would have to measure the truck you plan on using. Look up cm bed" SK86975842"

Thanks! I’m out because need one for cab & chassis.

Hopefully OP and Whiskers can make a deal