Announcement

Collapse
No announcement yet.

Tractor tire question

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Tractor tire question

    So you guys that have a tractor or work with them, do most people put anything besides air in the tires? If so, what is it and what are the benefits/cost of having this done.

    #2
    I run poly fill in all the front tires on our backhoes & ranch tractors.
    Run green slime in the rear tires.
    You don't want to poly fill the rear tires due to weight & cost. That extra weight & inertia will damage drivetrain components.

    Comment


      #3
      I have water in the rear tires of my tractor it adds weight to help when you are using the FEL.

      Bisch


      Sent from my iPhone using Tapatalk Pro

      Comment


        #4
        Originally posted by Bisch View Post
        I have water in the rear tires of my tractor it adds weight to help when you are using the FEL.

        Bisch


        Sent from my iPhone using Tapatalk Pro
        and antifreeze if in cold

        Comment


          #5
          Water and antifreeze in the rear of mine. Gives the tractor some nuts in the rear for heavy loader work or just pulling a heavy impliment. The extra weight from the loader throws the ballast off.

          Comment


            #6
            The reason I was asking is I have always heard of people doing this but never understood why. I have a little better understanding now, but doubt if I really need to do it. I just bought a 55hp cab tractor, but do not plan on pulling any plows or disc. I did get a 8 foot pull behind shredder and that will most likely be the most weight it will pull. The only 3 point attachment I have is a 6 foot tiller attachment and I don't think it is heavy enough to make any noticeable difference. The loader may get a workout every now and then pushing up brush piles and maybe lifting a tree while cutting it up.

            Comment


              #7
              Water will also let you know when you get a leak. Wet spot on the tire.

              Comment


                #8
                Water will also not leak out of the lil thorn holes as fast.

                Comment


                  #9
                  water in the back tires and double dose of sealant in all of them

                  Comment


                    #10
                    How much water do y'all put in each tire?

                    Comment


                      #11
                      I run poly sealant in all 4 , on a DK65 with industrial tires, zero issue on flats when shredding in heavy brush and cactus, the additional weight is only noticed when I am hauling on the trailer
                      It’s a tank on wheels,

                      Comment


                        #12
                        If your doing any front end loader work, it is a big difference. Almost dangerous not to have weight or water in rear tires if lifting heavy objects/dirt on uneven terrain.

                        Comment


                          #13
                          Originally posted by ramrod View Post
                          If your doing any front end loader work, it is a big difference. Almost dangerous not to have weight or water in rear tires if lifting heavy objects/dirt on uneven terrain.
                          100%.....and not almost, it IS VERY dangerous IMOP. They can get away from a person and in a hurry if they're not smart/careful/respectful.
                          Last edited by Slicefixer; 04-15-2020, 09:46 AM.

                          Comment


                            #14
                            Water and antifreeze here. I try for about 75-80% of the volume.

                            Comment


                              #15
                              I wouldn't worry about putting anything in your tires, just hook up the shredder when you plan to do heavy loader work. I have a 45 hp Kubota and it gets a little tipsy when I pick up round bales without something in the back, so I usually leave something hooked up (shredder or box blade)

                              Comment

                              Working...
                              X