I picked up a 6x12 enclosed trailer to make a hunting wagon out of. Its a blank slate to make it how I see fit. I was planning on making a removable bunk bed in the back of it, and build a countertop and shelf system in the v-nose of it. I'm going to get two of the 2x4' folding tables, one for the inside and one for the outside, to use as counter space. Got a bunch of hooks to mount to the wall for misc. What else am I missing? Any ideas would be greatly appreciated. Thanks, Brice
Announcement
Collapse
No announcement yet.
Help me set up my hunting trailer....
Collapse
X
-
i don't think i would go with a removable bunk bed,,, going to take up a whole lot of space all the time,,, make a fold down bunk from the wall,, you can put hooks in the bottom of it to hang things while it is folding up against the wall and virtually loose no space until you need the bed,,, I would do an inside table the same way,, also you could build a false floor from 6-10" deep with hinged lids to store things underneath but still inside.....
-
Get an AC, a bed, and spend a few nights at the lease with it to figure out what else you could possibly want/need.
There was a trailer posted on here that sounds similar to this. Let me see if I can find it. It was decked out decently
Edit: This was the one I was thinking of. Bit bigger than yours https://discussions.texasbowhunter.c...closed+trailerLast edited by SmTx; 08-25-2019, 09:55 PM.
Comment
-
Originally posted by xman59 View Posti don't think i would go with a removable bunk bed,,, going to take up a whole lot of space all the time,,, make a fold down bunk from the wall,, you can put hooks in the bottom of it to hang things while it is folding up against the wall and virtually loose no space until you need the bed,,, I would do an inside table the same way,, also you could build a false floor from 6-10" deep with hinged lids to store things underneath but still inside.....
He had taken diamond plate and made some fold down beds ( connected to the wall by bolted in hinges and heavy coated wire cables bracing on each end ) they had thick foam mattress , it had a fold down table made in the same manner, and a RV AC/ heat pump, he had made a fold down table up front with a portable Colman’s stove, sink was a molded utility sink from home depot plumped to a 110 volt on demand water heater , every thing folded up against the walls and
He would drop the ramp and drive his Jeep in and was much slicker then a RV
It needed some ventilation so he cut and install some roof vents
It even had a satellite dish placed on a pole
Insulation was 1/2 inch cello tech connected with 3M stick on Velcro
Hope to make me one someday it was super easy to setup
And I hope this helps
Comment
-
We had some bunks similar to these in our old race trailer. You can build them yourself if you're handy. Can order Foam Mattresses on Amazon pretty cheap too.
****FREE SHIPPING FOR THIS MONTH ONLY***** Color:Charcoal olefin upholstery with black naugahyde underside. Perfect for high traffic areas. Specific Dimensions:sleeping position 79” length 28” width from wall to unit edge 13” height from floor to unit bottom 46” height from floor to top of unit stowed position 5-1/2” width from wall to outside of the unit 11-3/4” height from floor to unit bottom 65” height from floor to top of unit DUE TO THE UNIQUE MOUNTING PATTERN OF THIS BUNK BED, A WALL MOUNT BED MOUNTING BRACKET IS HIGHLY RECOMMENDED. We ship to Canada and the USA!
Comment
-
I bought some camping trailer windows for mine, and a 12 V powered roof vent, so I can sleep in it off-grid in warm weather. I have a deep-cycle battery and solar panel to power the fan and lights. I haven't done it yet, but I thought that, with the windows, I could use it as a portable hunting blind some time.
Comment
Comment