Concrete slab cost?

[bullhead44]

What's a estimated cost of a 12x28 slab now? Haven't priced any in years. Of any does concrete work on the Gainesville / Sherman area, let me know

[WBA2000]

Concrete slab cost?

I just poured a 40x45. $95 per yard plus steel. Was told $2.50-3.50 sq.ft. to form, tie steel, pour and finish depending on how much dirt work had to be done.

[parkchief100]

I have been told that it is running about $7.00 a square foot.

[Draco]

I've had 2 slabs poured in the last month and one was $10.40 a square foot and the other was $11.80. As small as yours is, I would think it would be about 12 to 13 dollars a foot.

[kingranch]

Flatwork 4$Sq ft
Slab for shop with cross beams 8-9$

I have a guy if needed around austin

[DarrellS]

6-7 per square foot in the Waco area.

Sent from my SM-G930V using Tapatalk

[tps7742]

$5.00 to 5.50 a square ft plus dirt work north of the lufkin area.

[DRT]

Heck for those costs I will suck it up and pour my own.

Sent from my SAMSUNG-SGH-I337 using Tapatalk

[Take Dead Aim]

$9-$12 in the Austin area I pour daily. I can't pour for less than $8 and highly advise anyone paying that to really check just how your contractor can pour for that cheap. You are not getting a good deal in the end as I cannot see how anyone can pour for that cheap and do a quality job.

[DRT]

I can prepare a form with rebar, pour and finish a slab and do it well enough for most purposes. But I will live on pain killers and ice packs for a few days afterwards.

Sent from my SAMSUNG-SGH-I337 using Tapatalk

[Take Dead Aim]

I'm sure I could too but I'm going to let my guys do it instead. I feel it is more important to get a great quality foundation to build on over saving a few bucks.

[Atfulldraw]

just poured one where I subcontracted everything --- moderately deep footings, all steel (no mesh).

Still cost us almost $9.00 a foot.....

[kmitchl]

Too many variables. Conventional rebar slab? Size of grade beam. Any spread footings? Slab thickness? Etc. Best to get quotes based on your local area.

[hallp82]

I'm no concrete guy but 12x28 sounds like flat work not slab work. Is it a patio or something? If so, no beams or rebar are needed, just a decent base of sand. My buddy just got his 5000 sq foot slab done for $6.75 a ft. His brother works at redimix so he got a deal on the 4000 psi concrete though.


Sent from my iPhone using Tapatalk

[mmoses]

I just got a 1000sq ft poured with perimeter and cross beams for $6500.

But I got quotes from $5000-$17000