Most reliable feeder you ever used?

[DuckDogTrainer]

For me it was the FieldPro game feeder II. This feeder ran 2.5?yrs on a set of batteries without a charger and was still spinning slowly when we changed them!Called my friend who is still on the lease where I left it and he said still going strong! That feeder has been running for 10 yrs! Which one have you had the best luck with?

[Dc78]

Spincast been running for 9 years.

[spread5150]

For me it was the FieldPro game feeder II. This feeder ran 2.5?yrs on a set of batteries without a charger and was still spinning slowly when we changed them!Called my friend who is still on the lease where I left it and he said still going strong! That feeder has been running for 10 yrs! Which one have you had the best luck with?

I have had great luck with the Moultrie Pro Hunters and a generic varmit cage. Batt work forever. I have with over 2 yrs on the same battery. Im running about 11 of them right now with no fails. I change batteries on them in August though (more for my piece of mind).

West Texas heat,Freer rain. No fails.

Go figure it also looks like they stopped making them.

[DBLHKUP]

https://www.ultramaticfeeders.com/

Spin cast - The Timer, solar panel, eliminator spinner, 5 yrs no problems, winch up

[Drycreek3189]

My Texas Hunter feeders are 15 years old and work every day for about nine months a year.

[EastTxTracking]

Sweeney feeders has been the best for me so far

[spread5150]

I should add that I went with the moultrie because I needed to have field replacements. I have been through some high dollar jobs. Some better than others. But I have 2 extra feeders at each camp. If I get there and one is down I have everything to swap it out and bring the other back with me. So for 50 bucks ea I can get 3 of them for what others cost. Works for me.

[Fishndude]

12v motor and battery with The Timer, solar panel and a tornado spin plate attached to the bottom of whatever it is containing corn and funneled to the plate. (I build my own cages for the pesky varmints)

Fool proof

[RMW]

Westtexasfeedersupply control units with solar panel are tough to beat. Lamco, ultramatic feeders and a few others use these units for there reliability. I have 2 going on 6 years and never even changed the battery.

[twosixteens]

I have been running All Season newest one is about 10 years old no problems yet

[Passthrough]

All Seasons with "The Timer"

[Mudslinger]

Westtexasfeedersupply control units with solar panel are tough to beat. Lamco, ultramatic feeders and a few others use these units for there reliability. I have 2 going on 6 years and never even changed the battery.

These, West Texas Feeder Supply out of Odessa.

[KactusKiller]

Texas hunter products, the feeders actually have too much torque so I run them with a 6vlt battery instead of 12v

[Low Fence]

I have 2 spin cast for 10 years now that fail to go off about as often as they go off

[smithnwesson]

Magnum feeder for me had it about 13 years now