Duracoating in the DFW area

[Mike D]

It is a two part epoxy paint. Measuring is pretty critical. Degrease surface and spray, clean up with laquer thinner and reducer. It is thin enough to flow easily.

If you are doing a single color on a pistol frame, buy the paint. I'll spray it for a cold one and the rest of the paint. I think it was about $18/ bottle.

Bryan

Hmmmm, tempting. I have 6 Magpul PMAGS that I want done in Flat Dark Earth and if that turns out well I have 6 more steel mags that I would want done.

[Bill]

There have been threads on duracoating pistols on xdtalk.com. You may want to look around there.

Duracoat sells the patterns for a DIY job. These are for rifles, I don't now about pistols.

http://www.duracoat-firearm-finishes.com/

These guys sell stencils.

http://www.tacticalcamo.com/Paint-Stencils.html

Disclaimer- I've never done it myself. If you give it a try, be sure to post it on the DIY section.

[Mike D]

There have been threads on duracoating pistols on xdtalk.com. You may want to look around there.

Duracoat sells the patterns for a DIY job. These are for rifles, I don't now about pistols.

http://www.duracoat-firearm-finishes.com/

These guys sell stencils.

http://www.tacticalcamo.com/Paint-Stencils.html

Disclaimer- I've never done it myself. If you give it a try, be sure to post it on the DIY section.

There's a pretty good pictorial on Calguns.net as well.

[jwstrother]

If your looking for water transfer the closest company I found was in Ada, OK.

Had mine done this past summer, they did a really good job.

https://www.freedomgraphix.com

[Mike D]

Nope, not looking for water transfer. Thanks though.

[Sparkles]

What about Gunmaster in Plano? Seems like my buddy had Ken Duracoat a rifle before.