Stihl Chainsaw Mechanics Question

[Montec man]

I agree with Simek. You're probably better off buying a new one, but don't toss the old one. Keep it for spare parts.

[Stolle]

Take it to Scribner's buddy Mickey. This is what he does at Acme Saw and Tool in Victoria....he can tell you how the cow eats cabbage.

I'm one step a head you! I'm waiting on his call!

Oh and the guy that was running the saw when it crashed did not put fuel in it!!!! I figured I would get stuck with the cost.

[Matthew]

If you'd have been operating the saw instead of a beer can, this might not have happened!

[djs]

[Needmo]

Stihl builds its saws in 2 different usage catagories (1.)even number series and (2.)odd number series ( I.E. MS260, and MS310.) The difference is the all even numbers are made for commercial use and are completely rebuildable (replacable cylinder), and the saw with an odd number included in the series is bult for home owners amd are built with a one peice block and cylinder. This is why it almost cost the same to buy a new saw as it does to rebuild it.

[Stolle]

If you'd have been operating the saw instead of a beer can, this might not have happened!

This was before the beer drinking! I was splitting wood. You have no room to talk Mr. I have to leave early before the work and clean up is done.

[Stolle]

Stihl builds its saws in 2 different usage catagories (1.)even number series and (2.)odd number series ( I.E. MS260, and MS310.) The difference is the all even numbers are made for commercial use and are completely rebuildable (replacable cylinder), and the saw with an odd number included in the series is bult for home owners amd are built with a one peice block and cylinder. This is why it almost cost the same to buy a new saw as it does to rebuild it.

Yep! Looks like my lesson is going to cost me about $453.

[bowmansdad]

Been there and done that, Matt. Way back when I loaned my saw to a friend against my
better judgment and when I got it, it was burned up. I asked him what happened and he
said it was running fine when he was finished. I have never loaned mine out again.

[Stolle]

Been there and done that, Matt. Way back when I loaned my saw to a friend against my
better judgment and when I got it, it was burned up. I asked him what happened and he
said it was running fine when he was finished. I have never loaned mine out again.

I'm normally not stingy with my toys, but the new saw will be for me only.

[Stolle]

Well finally after almost 2 years I have decided to rebuild this saw! I ordered a new cylinder and piston yesterday. The rebuild looks to be pretty simple. You tube has lots of good videos out there. If anyone has any pointers please let me know. I have not ordered bearings or seals, but might replace them if they are not in good condition when I tear it down.

I figured spending $200 dollars compared to $500 for a new one would make it worth a shot.

[12 point]

Hope it works out well for you. I have owned many Stihl saws and lots of their other products. The Stihl saws have all held up nicely and all still work great after years of hard use. My first Stihl saw was an 036 PRO and still have it.

If I can help in any way as far as the rebuild, shoot me a PM.

[SAC]

Just pay attention. I redid the top end of a 3 wheeler engine with no clue what I was doing. Somehow it all came together.

[Hold My Beer]

Good luck Matt... Just curious though, why 2 years to make a decision?

[bulletpusher]

Buy the new one, and write on the top of the gas can with a sharpie marker "Mixed Chainsaw Gas" and never loan it out. I tell people often you can't use my saw but I will gladly cut up your tree for you.

[Stoof]

Here is my collection of pistons from rebuilding 260 Pros. Relatively easy to do but as stated the commercial models are easier to work on. If you rebuild you might want to do the carb at the same time and get it over with.