Washer toss (the game) need advice on Texas style

[SelfGuided]

Throwing a party Saturday and want to setup washers in the yard. Tried researching on the internet and found a bunch of different rules, setup, etc. Couple of questions for the local experts:

Exactly how far apart are the washer holes supposed to be?

Years ago I used a buried soup can with the top cut out for the hole, any better suggestions (PVC?)? I've had boxes in the past, this time around I'm going with the buried hole type and make it a permanent fixture in the yard.

Appreciate any suggestions!

[Ouch]

15-20 feet, depending on size of washer and hole. It's really not that big an issue, if everyone is tossing from the same distance.

[Bob G]

i use 15' that way everyone has a chance to get there. btw-what time??? team smores wants to play but my wife has a hair appointment at 3 and the kids will be taking a bath around 7. can i throw over here and turn in my results via blackberry?

tending the fire,
Bob G.

[TC]

we've always used 21' hole to hole...

[Hawkins]

15 feet for us

[Chris]

21' center of cup to center of cup. 1" flat washers. 1pt washerlink,3pts leaner with daylight and 5pts in the cup.

[SelfGuided]

i use 15' that way everyone has a chance to get there. btw-what time??? team smores wants to play but my wife has a hair appointment at 3 and the kids will be taking a bath around 7. can i throw over here and turn in my results via blackberry?

tending the fire,
Bob G.

Party starts at 3 so you'll be throwin at the same time! Need LDPs of each toss to be official

[SelfGuided]

21' center of cup to center of cup. 1" flat washers. 1pt washerlink,3pts leaner with daylight and 5pts in the cup.

Thanks! That's exactly what I was looking for.

[SKLOSS]

we always space the holes at 528.703 centimeters

[medic151]

21 feet hole to hole. We would build a box even with the ground and put sand in it with a galvanized metal fence pole cut down and driven into the ground in the center of the box. 2 inch washers painted different colors. Box dimensions were 2 X 2. 1 point for closest, 3 for leaners, 5 for ringers with cover up cancellation.

[cosmiccowboy]

All the "original" ones I saw used vienna sausage cans.

[SPUD]

I like playing washers with 3 holes at each end.

front hole = 1 pt.
mid hole = 3 pts.
back hole = 5 pts.