alright more problems with the 49lb limbs...help!

[jreyna920]

alright.... many of yall might have seen my post about trying to tune the 49lb limbs, good news is i have them tuned now... bad news is as soon as the limb are in the sun for a while the bottom limb softens and starts rolling to the left when drawn... it happened a month ago while out shooting when i let a cousin shoot it and i thought maybe he was torqueing the handle or something... but since then today was the first day out shooting in the heat again and it did it again after about 15-20 mins in the heat.... i twisted it back by hand and held it and its shooting good again.... what can i do to keep it from happening again?

thanks again guys.... this forum is a huge help when running into these situations...

John

[jreyna920]

forgot to mention it is rolling so much the bow spins around and unstrings itself

[loco cacahuate]

I would send them back and get them replaced.

[Mike Murphey]

How old of a bow? Most times when a limb twists is will always twist....

[bob sarrels]

I would not shoot that bow in the heat. Something is up. The glue should not change simply because you are shooting in a warmer temp. The epoxy is normally cured at appx. 180 degrees. I am pretty sure it ain't that hot where you live. You have some other problem and I ain't sure what it is.