Im bareshaft tuning on my Sarrels 60" dual shelved Lynx recurve, 53#@28. My actual draw is 31.5"-32" but only pull about 28.5"-29". Split finger. 8" brace height. Between two nock points is 1/4"(top of bottom nock) to 7/16" (bottom of top nock).
I built and am tuning small game and large game arrows. All my arrows are factory full length...I believe. I have been working on my form for the past two years and have never cut a shaft. I have a saw and am afraid to use it.
The small game are Beman Centershot 600 7gpi, 30 7/8" long shafts, 75gr insert, 100 gr point, total weight 417gr and FOC is 18.4%.
The large game are Easton Aftermaths 340 9.6gpi,31 7/8" long shafts, 75 gr insert, 175 gr point, total weight 575 gr and FOC is 20.6%.
Bareshaft and fletched shots are from 10yds.
What do yall suggest adjusting first?
First pic is large game shot left handed.
I built and am tuning small game and large game arrows. All my arrows are factory full length...I believe. I have been working on my form for the past two years and have never cut a shaft. I have a saw and am afraid to use it.
The small game are Beman Centershot 600 7gpi, 30 7/8" long shafts, 75gr insert, 100 gr point, total weight 417gr and FOC is 18.4%.
The large game are Easton Aftermaths 340 9.6gpi,31 7/8" long shafts, 75 gr insert, 175 gr point, total weight 575 gr and FOC is 20.6%.
Bareshaft and fletched shots are from 10yds.
What do yall suggest adjusting first?
First pic is large game shot left handed.
Comment