I just bought a Blueridge SR from Bob and am trying to figure out what arrows to use. I have been playing with the 3rivers spine calculator and the one on Ricks site and am not sure of my results. I'd like to not have to buy new arrows or broadheads (I use 150 grain single bevel). Totally willing to cut the Heritage 150s down but don't want to do that until I am pretty sure of the length. I looked at the GT screw in weights for my GT Trads but I don't want to have to stack so much weight my arrow flight looks like a rainbow. Any help is greatly appreciated!
Here are the bow stats
60in Blueridge SR longbow
48lbs @ 28in
Center cut with Velcro as strikeplate
8in BH
12strand b95 string (I think this is what he said it is)
My Stats:
27 3/4 in draw
Arrows I have
GT Trad
31.5in long
150 grain points
3x 5in shield cut with white reflective arrow wraps.
12 grain inserts
12 grain nock
Carbon Express heritage 150
32 3/4in Long (full length)
100 grain points
3x 5 feathers (no wraps)
12 grain insert
12 grain nock
Here are some pics of the bow and what I have entered into the spine calculator.
Sent from my SM-G892U using Tapatalk
Here are the bow stats
60in Blueridge SR longbow
48lbs @ 28in
Center cut with Velcro as strikeplate
8in BH
12strand b95 string (I think this is what he said it is)
My Stats:
27 3/4 in draw
Arrows I have
GT Trad
31.5in long
150 grain points
3x 5in shield cut with white reflective arrow wraps.
12 grain inserts
12 grain nock
Carbon Express heritage 150
32 3/4in Long (full length)
100 grain points
3x 5 feathers (no wraps)
12 grain insert
12 grain nock
Here are some pics of the bow and what I have entered into the spine calculator.
Sent from my SM-G892U using Tapatalk
Comment