Yep but that's way too much thinking for me. Then putting together the target. Just not worth it. Then again I'm fat and lazy. Anyway that's as far as I read and figured, nah. I'll just go shoot. Which just proves what I've known for a while. I'm fat and lazy.
How and where do I measure for the strike plate position value? Im measuring my dual shelfed recurve and the shelf is small. I measure from the centerline of the bow to the arrow side of the strike plate about 1/2”. Is my value -1/2”?
I plugged my figures in and Im confused what to read from the chart. What should I be looking for....what is a glaring deficiency?
How and where do I measure for the strike plate position value? Im measuring my dual shelfed recurve and the shelf is small. I measure from the centerline of the bow to the arrow side of the strike plate about 1/2”. Is my value -1/2”?
I plugged my figures in and Im confused what to read from the chart. What should I be looking for....what is a glaring deficiency?
Sounds to me like it is a positive 1/2" (outside of center 1/2")
Go to the following link.
It has some pretty good measuring instructions for determining the center cut of a bow.
Comment