Shell blind platform

[DRT]

A friend wanted one for his Krivoman blind so I built him one that I did in the DIY section. He is a bowhunter as well. Yesterday I tried a little different design when starting on one for another friend (also a bowhunter) but I can't live with the lack of rigidity of the angle vs the tubing and the cross bracing done this way isn't as effective. I will keep this one for my Maverick blind, the big wooden one is too difficult to set up or move by myself. Or even with a friend. This design can easily be set up alone. Will add the plywood at the ranch and cut it to match the outside lip of the blind to no ledge to soak and direct water into the blind. Will post another pic after it's up.

I will start one I feel worthy to give to a friend tomorrow. Plan A was better.

Sent from my SM-J710MN using Tapatalk

[Randy M]

That's nice! I like that it comes apart to move/store easily.

[SwampRabbit]

Just don't be listening to Chubby Checker on that thing.

Sent from my SM-G930P using Tapatalk

[DRT]

Just don't be listening to Chubby Checker on that thing.

Sent from my SM-G930P using Tapatalk

Without the leg to leg diagonal bracing I used on my first one I was worried about that but as soon as I bolted the steps up it locked down pretty good. However I am going back to the single diagonal brace between all four legs. You try to find ways to improve your design. Sometimes they aren't what you hoped.

Sent from my SM-J710MN using Tapatalk