Draw length and fine tuning

[Davidrubio]

A month ago I started working on my form and I think I may picked up an extra inch or more on my draw length, this may have caused for my arrow to became weak.
So I decided to strip my good tips and do the bare shaft test ( I know I did this 3 years ago).
Sure enough they were way to weak.
I had to cut it to make it stiff enough and still use a 145gr tip.

This is as far as I can cut it. DOES IT LOOK SAFE.

Also does it ever happened to you that the arrows became stiff after several years.

[Davidrubio]

Field tip

[gettin closer]

That looks fine to me. They say to leave at least. 1 inch past your riser. I like a 3" minimum be cause I might get excited and over draw (bad form) and I do not want to have an oops moment!

[SwampRabbit]

That looks fine to me. That is how much my arrow sticks out... Maybe even a little less.

I don't see arrows getting stiff over time. The string however can stretch and the arrow will seem week if you don't adjust your brace height back by adding more twists.

[Tracker0721]

I like to touch my knuckle with my broadhead. Makes it so I know I'm at the proper anchor.