For those who might be interested.
How to shoot vanes off the shelf of traditional bows.
Keep in mind as you watch this, and listen to my instructions:
The amount of shelf build up, and strike plate positioning will depend on the shelf width of the bow you are shooting, and how far past center the strike plate is cut. It will vary from one bow to the next.
Just follow your standard tuning processes, and then implement these modifications to the point they are needed, if needed at all.
The bottom line is - you must tune for 100% fletching clearance at pass.
Hope it helps.
Rick
How to shoot vanes off the shelf of traditional bows.
Keep in mind as you watch this, and listen to my instructions:
The amount of shelf build up, and strike plate positioning will depend on the shelf width of the bow you are shooting, and how far past center the strike plate is cut. It will vary from one bow to the next.
Just follow your standard tuning processes, and then implement these modifications to the point they are needed, if needed at all.
The bottom line is - you must tune for 100% fletching clearance at pass.
| IMPORTANT NOTICE: No media files are hosted on these forums. By clicking the link below you agree to view content from an external website. We can not be held responsible for the suitability or legality of this material. Posting of objectionable material in text, attachments or embedded links is grounds for immediate suspension. |
| I AGREE, PLAY EMBEDDED VIDEO |
Hope it helps.
Rick
ha, ha.
Comment