glass limbs take down, do you need to unstring and if so how long would you leave it strung? thanks
Announcement
Collapse
No announcement yet.
do you need to unstring recurve?
Collapse
X
-
It is OK to leave it strung if it is not going to be in a hot environment (like in your car). Some people leave their bows strung for months at a time. Personally, I unstring my longbow every time I quit shooting. If you are shooting a recurve make sure you use a stringer to string and unstring your bow.
Bisch
-
Originally posted by Felix40 View PostI almost never unstring my recurves, only when they are in a hot car like said above. Just don't store it in a corner sitting on one limb tip for an extended period of time. Always try to keep it horizontal hanging from the string or both limbs if that makes sense.
I am wondering why you guys think you dont need a stringer for a longbow? Seems to me like you could torque the limbs just the same on a longbow as a recurve. I use a stringer on my longbow.
Comment
-
Originally posted by mrddye View PostBingo on storing them hanging. Seen the limbs twist on an old Ben Pearson from sitting on one limb over time.
I am wondering why you guys think you dont need a stringer for a longbow? Seems to me like you could torque the limbs just the same on a longbow as a recurve. I use a stringer on my longbow.
Also, limb twist is not nearly as likely with a longbow as with a recurve, again due to design. Recurve limbs are wider and thinner in their design and that is why they are more prone to limb twist when a stringer is not used.
I know bowyers who will void their warranty if they see you stringing/unstringing their recurves without a stringer.
Bisch
Comment
-
One thing I did not say about leaving bows strung. Never leave your selfbow strung longer than you have to. 3 Hr. during 3D shoot or morning hunt etc. It will leave a set in it that you don't want.Last edited by Selfbowman; 11-10-2011, 06:45 AM.
Comment
Comment