Ugh

[DFWPI]

Think I now know why I’m not liking the AR pistol so much. Suppressor dropped off today to send back for repairs, and going to see about sighting it in without the suppressor. Also, had picked up a Vortex Strike Eagle a couple of days ago, but it’s almost like somebody at the store glued the battery compartment together.


Sent from my iPhone using Tapatalk

[Walker]

That looks like you need some sort of spanner wrench.

[DFWPI]

Ugh

That looks like you need some sort of spanner wrench.

No clue to what that is…


Okay, looked it up but not sure what I would use it for on the suppressor.


Sent from my iPhone using Tapatalk

[Clay C]

Which suppressor, mount and gun?

[BTLowry]

What caused that?

Assuming it had been used multiple times before ?

[Pushbutton2]

Looks like a baffle strike(s) to me

[Anon]

Looks like a nomad...ar pistol...did the bullet not stabilize or mount come loose? Also dead air has had problems with end cap holes not being centered

[DFWPI]

Looks like a nomad...ar pistol...did the bullet not stabilize or mount come loose? Also dead air has had problems with end cap holes not being centered

I’ve used it on several rifles and AR rifles before with no problems. We’re not sure what happened here, FFL is sending it back for repairs.


Sent from my iPhone using Tapatalk

[DFWPI]

Looks like a baffle strike(s) to me

Apparently several baffles are damaged.


Sent from my iPhone using Tapatalk

[DFWPI]

Looks like a nomad...ar pistol...did the bullet not stabilize or mount come loose? Also dead air has had problems with end cap holes not being centered

We aren’t sure. Yes was okay n AR pistol. It was in tight when we took it off today.


Sent from my iPhone using Tapatalk

[trophy8]

What caliber? What brand barrel? Had you used the can on this rifle without issues before? Or did you have issues sighting it in?

[DFWPI]

What caliber? What brand barrel? Had you used the can on this rifle without issues before? Or did you have issues sighting it in?

300 BLK
Ballistic Advantage 10” 1:7 5R
First time on this gun
Yes, problems sighting in gun


Sent from my iPhone using Tapatalk

[trophy8]

300 BLK
Ballistic Advantage 10” 1:7 5R
First time on this gun
Yes, problems sighting in gun


Sent from my iPhone using Tapatalk

I’m betting you had minor strikes from the start. And then caught a bad one. What suppressor is it?

I’d reach out to ballistic advantage and have that barrel checked. Thread concentricity etc.

Factory ammo?

[DFWPI]

I’m betting you had minor strikes from the start. And then caught a bad one. What suppressor is it?

I’d reach out to ballistic advantage and have that barrel checked. Thread concentricity etc.

Factory ammo?

Nomad Dead Air L
Shooting gun today without suppressor to see how it does
Yes on factory ammo


Sent from my iPhone using Tapatalk

[Clay C]

What muzzle device/mounting system are you using.

I'm betting the threads or muzzle device were not concentric