Savage 110 bolt/trigger help!

[gneimeth]

I have a savage storm 110 (lefty 300wm) that I bought last year. I upgraded the trigger with a rifle basix and spent hours tweaking it and adjusting it to operate properly - the sear and safety along with the bottom bolt release sure are finicky but I finally got it dialed in. Next I decided to change out the bolt handle and after swapping multiple times/even reinstalling the accu-trigger I cannot get either trigger to fire. I’ve reassembled the bolt handle and position on the bolt itself thinking maybe I installed the handle in the wrong direction but no matter what I do I’m at the same place. Can’t get the trigger to operate and fire after cycling the bolt and safety.

What am I missing (I could test fire and adjust the trigger with the action out of the stock before but I’ve got nada)?

Appreciate any advice,
Signed, Jr. Gunsmith

[flyinstroke]

SO right now the trigger will fire when it is out of the stock but not while it was in the stock? Is that correct? I had to do a little filing on one of my stocks to get the rifle basics trigger to work correctly if I am not mistaken. I am also a left. remove it from the stock and take some pics for me.

Thanks

[gumbl3]

With the Sav 1 I've seen too many turns on the safety screw does not allow the sear to relase