Reloading Question (Bullets)

[KyleW]

Looking for some advice from those of you that reload.

I am about to start developing a load for my 25-06. I have two different bullets on hand - Sierra #1620 (Prohunter 100 Gr Spitzer) and Hornady #2552 (Interlock 117 Gr BTSP).

I was originally planning on reloading the Prohunter bullet - but it has been discontinued. Is it a bad idea to reload the Prohunter bullet, then once I run out of bullets - switch to another 100 Gr bullet such as the Sierra Gameking? Will there be a drastic difference between one brand to another where I'd need to completely redevelop a load for it when I run out? Am I better off starting off with the Hornady Interlock bullet, that way I can stick with it?

Keep in mind this rifle is shot less than 5 rounds per year generally - so in theory it will be several years before running out of either bullet.

Thanks in advance!

[Cajun Blake]

Looking for some advice from those of you that reload.

I am about to start developing a load for my 25-06. I have two different bullets on hand - Sierra #1620 (Prohunter 100 Gr Spitzer) and Hornady #2552 (Interlock 117 Gr BTSP).

How many bullets do you have ... 50 , 100, 500 ?

I was originally planning on reloading the Prohunter bullet - but it has been discontinued. Is it a bad idea to reload the Prohunter bullet, then once I run out of bullets - switch to another 100 Gr bullet such as the Sierra Gameking? Will there be a drastic difference between one brand to another where I'd need to completely redevelop a load for it when I run out? Am I better off starting off with the Hornady Interlock bullet, that way I can stick with it?

Keep in mind this rifle is shot less than 5 rounds per year generally - so in theory it will be several years before running out of either bullet.

Thanks in advance!

Anytime you change bullets, brass, powder, and/or primers you will have to do load development unless you have the same lot number. Changes to any of those will effect velocity and accuracy / grouping. Although load development may be minimal, it will still have to be done. That’s why Benchrest shooters and hard core reloaders buy 1,000’s of bullets and numerous pounds of powder (same lot #) when they find the magic load.

[KyleW]

How many bullets do you have ... 50 , 100, 500 ?




Anytime you change bullets, brass, powder, and/or primers you will have to do load development unless you have the same lot number. Changes to any of those will effect velocity and accuracy / grouping. Although load development may be minimal, it will still have to be done. That’s why Benchrest shooters and hard core reloaders buy 1,000’s of bullets and numerous pounds of powder (same lot #) when they find the magic load.

I have 80ish Interlocks and 120ish of the Prohunter.

Thanks for the info! Sounds like I will need to make tweaks to the load either way, so maybe I will just load up some rounds with each bullet and see what the rifle likes.

[Arrow-Tek]

I love the guys that say I want to shoot this bullet but can’t find the powder or I love this powder but can’t find the bullet. Kinda like when you go to Walmart looking for toilet paper and you leave with paper towels. Good luck with your reloading adventures in the current state!

[tpepper70]

I have 80ish Interlocks and 120ish of the Prohunter.



Thanks for the info! Sounds like I will need to make tweaks to the load either way, so maybe I will just load up some rounds with each bullet and see what the rifle likes.

Since you don't shoot much, find the load for each then relax and enjoy the thought that you found a great load that will last you years without worry. When you run out, then find a new bullet and start again. Part of the fun of reloading is the self gratification of finding what works best. Enjoy.

Sent from my SM-A716U using Tapatalk

[bboswell]

I would budget 30-50 rounds to get development done. If you go with the Pro Hunters and shoot 5 per year you will have enough for 15-18 years.


Or


Midway has 25 cal 110g Accubonds in stock and you could stock up on enough of those that you will never run out nor have to start over on a load.

https://www.midwayusa.com/product/1022979275?pid=564006

[tdwinklr]

Looking for some advice from those of you that reload.

I am about to start developing a load for my 25-06. I have two different bullets on hand - Sierra #1620 (Prohunter 100 Gr Spitzer) and Hornady #2552 (Interlock 117 Gr BTSP).

I was originally planning on reloading the Prohunter bullet - but it has been discontinued. Is it a bad idea to reload the Prohunter bullet, then once I run out of bullets - switch to another 100 Gr bullet such as the Sierra Gameking? Will there be a drastic difference between one brand to another where I'd need to completely redevelop a load for it when I run out? Am I better off starting off with the Hornady Interlock bullet, that way I can stick with it?

Keep in mind this rifle is shot less than 5 rounds per year generally - so in theory it will be several years before running out of either bullet.

Thanks in advance!

Isn't the Gameking a boattail and the Prohunter a flat base? The loads may not be different but on paper they will be.
If you can't find the Sierras later, try the Speer Grand Slam in 120 grn. Was my best round through the .25-06 I had, killed a lot of deer with it.
And when switching to an unknown bullet or size, always start from the lowest charge and work up.

[Leverhunter]

At 5 rounds a year I would buy custom ammo and skip the reloading.