I'm mounting a Vortex Viper 6.5-20x50 on a Weatherby Vanguard. It has a 30mm tube and as stated 50mm objective. I'm going to use Talley rings. My question is do I need medium or high rings to keep the bell from contacting the barrel? Thanks.
1 a. Ring Heights are measure from the closest contact point at the receiver to the bottom of the ring cradle. The following rules apply to most, but not all, of our rings: (Front Rings) Extra Low .300", Low .400", Medium .500", Extra High .600 inch. In some cases, like for example, the Browning A-Bolt add .05" to
Comment