form 1 question

[Kossetx]

Howdy Folks, Been searching for an hour and still don't understand. If I want to do a SBR with a suppressor is that 2 form 1's if I'm building it myself?

[KDinTX]

If its just for the SBR then one form 1, if you are drilling a solvent trap then a form 1 for that as well. A suppressor will carry its own form 4 if you bought it from a dealer.

[KDinTX]

Howdy Folks, Been searching for an hour and still don't understand. If I want to do a SBR with a suppressor is that 2 form 1's if I'm building it myself?

Form 1 for the SBR, then if building a suppressor then a Form 1 for that as well.

[bowaddict40]

Yes you are correct 2 stamps. You can also buy all of the parts for the suppressor. You just cant drill any holes. If you are on Facebook look at the group Form1 suppressor builders. There is a lot of guys on there that really know what they are doing. There is also a pin at the top of their page that list all of the best suppliers.

[QuackHunter]

Unless you pin and weld the suppressor to the rifle to bring it to 16in barrel then it’s 2 stamps.


Sent from my iPhone using Tapatalk

[Kossetx]

Thanks, I'll get the form 1 can first and just use a brace.