Quick load help

[flyinstroke]

Can someone help me that has quickload.

Using benchmark powder 25 grains shooting 95 gr Hornady sst out of a 6x45. The other day at 25 grains no sign of pressure. Today cratering primer pockets.

Thanks in advance.


Sent from my iPhone using Tapatalk

[Stick1]

Just using the basic info you provided, QL has you at 76K psi. I'd say it may be a little above warm

[flyinstroke]

Just using the basic info you provided, QL has you at 76K psi. I'd say it may be a little above warm

What other info do you need?


Sent from my iPhone using Tapatalk

[-HIC-]

Can someone help me that has quickload.

Using benchmark powder 25 grains shooting 95 gr Hornady sst out of a 6x45. The other day at 25 grains no sign of pressure. Today cratering primer pockets.

Thanks in advance.


Sent from my iPhone using Tapatalk

I do not have QL, but if someone does they will need the case volume in H20, and that bullet may not be in the release so be prepared with those details.

Sent from my SM-G975U using Tapatalk

[Stick1]

What other info do you need?


Sent from my iPhone using Tapatalk

Water volume of your case and seating depth will yield a more precise answer, but I can tell you it will still likely be way above a safe load.

[-HIC-]

Just using the basic info you provided, QL has you at 76K psi. I'd say it may be a little above warm

Robert in just in time!

Sent from my SM-G975U using Tapatalk

[flyinstroke]

Is there nothing the green screen can’t do. Let me see if I can get the info. Not my rifle so be patient.


Sent from my iPhone using Tapatalk

[-HIC-]

Is there nothing the green screen can’t do. Let me see if I can get the info. Not my rifle so be patient.


Sent from my iPhone using Tapatalk

Not much. You have the best in the business weighing in on your thread!

Sent from my SM-G975U using Tapatalk