Picatinny Rail and scope rings

[Kenner97]

I just ordered a Bergara rifle and bought a Athlon Scope. Just need some suggestions on rail mount and rings. Scope has a 50mm objective. Will medium rings clear?

[KDinTX]

mediums will clear, lows may clear but would be close. Lows clear a 4x16x44 scope with a 0 moa rail on one of my setups, with a little room to spare.

[solocam_aggie]

I need rings and a rail for my new set up too. In

[Kenner97]

Another Question.
Is a 22-250 considered long or short action?

[Notaguide]

Depends on some manufacturers with height. Will say that with Warne rail and rings you may need to go high. Recently installed a pair of Hawkins hybrid rings and the lows would possibly work with that set up so it can vary.

A 22-250 is a SA.

[Notaguide]

Depends on some manufacturers with height. Will say that with Warne rail and rings you may need to go high which I'm running on a 700 22-250 (sps) with 50mm VX3. Barrel contour can require more or less also. Bergara are compatible with 700 accessories I believe so should be the same. Recently installed a pair of Hawkins hybrid rings and the lows would possibly work with that set up so it can vary.

A 22-250 is a SA.

[Kenner97]

Depends on some manufacturers with height. Will say that with Warne rail and rings you may need to go high which I'm running on a 700 22-250 (sps) with 50mm VX3. Barrel contour can require more or less also. Bergara are compatible with 700 accessories I believe so should be the same. Recently installed a pair of Hawkins hybrid rings and the lows would possibly work with that set up so it can vary.

A 22-250 is a SA.

Thank you. It’s has a #6 contour barrel.
Yes it is compatible with Remington 700.

[meltingfeather]

Mounting a scope tonight on a B-14 HMR... will let you know.

[Kenner97]

Mounting a scope tonight on a B-14 HMR... will let you know.

Thanks. Looking forward to what works.

[sectxag06]

Go with Seekins rings.

[trophy8]

Need to know what size tube is on the scope to properly answer the ring question. If it’s 30mm then lows should work depending on manufacturer. I agree on going with seekins.

[Kenner97]

Need to know what size tube is on the scope to properly answer the ring question. If it’s 30mm then lows should work depending on manufacturer. I agree on going with seekins.

30mm tube.
I will look into Seekins.

[meltingfeather]

Thanks. Looking forward to what works.

Seekins 20MOA rail and Seekins 1.26” rings leave >0.5” clearance between barrel and my Nikon Black 50mm scope.
Impulsively pulled the trigger on the rings because they were a deal... turned out to be the “extra high” version and guess what? They’re extra high.

[Kenner97]

Thanks. I ended up buying a weaver 20 Moa rail and vortex tactical medium rings.
Couldn’t afford seekins.