TBH Reloading Library

[2Lazy2P]

looking for a 308 load using 125gr nosler bt's

and 243 loads using 80-87gr bullets

I have varget but will use whatever needed

You might give imr 3031 a look. I've had good luck with it using lighter .308 bullets. My go to load for 155vld uses it.

For .243 and 75-80 grainers I like H4895.

[TXraiderTK]

Thanks WTucker
I was hoping to get a few replies/help on my 243 and 308 loads

[TXraiderTK]

2lazy2p lolol nice name
Ill definitely look into those

[McClain]

I have a Remington 700 .243 that shoots 85 grain Sierra Gameking HPs and IMR-4350 really good. Less than 1/2” 3-shot groups on a regular basis.

I too am getting excellent accuracy and MV (3000 fps) in a .243 ProHunter Encore with 28" 10-twist Bergara barrel, shooting IMR4350 with 85 grain Sierra GKs. Similar results with H4350 if I bump up the powder charge by 0.5 grain.

[BLACKFINTURKEY]

Any loads for 223 75gr hornady hpbt using varget or 8208xbr?

[Bowhunter1994]

tagged gonna cook up some 150 gr 308's very soon.

[Zen Archery]

Any loads for 223 75gr hornady hpbt using varget or 8208xbr?

what are you shooting it out of...
I've had better success with Varget.

[Zen Archery]

I will get my catalog of .308 rounds uploaded later.

[BLACKFINTURKEY]

what are you shooting it out of...

I've had better success with Varget.

A savage 10 24” bull barrel 1-9 twist.


Sent from my iPhone using Tapatalk

[SabreKiller]

6.5 X 55 Swede
Hornady brass
42.0 gr IMR 4350
CCI 200
130 gr. Swift Scirocco

I'm going to experiment with the 130 gr. Nosler Accubond and RL 26 for this caliber/gun after the season is over. I'm seeing a lot of good reviews on this powder.


7mm RSAUM
Remington brass
59.0 gr. IMR 4350
FED 215 GM
140 gr. Barnes TTSX

This was my "go to" load for west Texas muleys and it shoots .5 MOA or less depending on me that day. Super accurate and at 3050 fps I've never had anything take more than a step.


.223
Winchester brass
25.0 gr. IMR 3031
Remington 7-1/2
50 gr. Nosler BT

This load shoots bug holes out of my CZ 527 American.

.270 Win
Winchester brass
53.2 gr. IMR 4350
CCI 200
140 gr. Hornady BTSP

This is the first cartridge I started handloading for. I settled on this because it is very accurate in my Browning A-bolt.

.257 Roberts
Remington brass
45.0 gr. IMR 4350
CCI 200 or Remington 9-1/2
90 gr. Barnes X

super accurate load in my M70 Featherweight. I've probably killed more critters with this combination than any other. Unfortunately Barnes doesn't make the 90 grain X bullet anymore.

7mm/08
Remington brass
45.5 gr. IMR 4350
CCI 200 or Remington 9-1/2
140 gr. Nosler Accubond

I was about to give up on my 700 CDL until I had it bedded/trigger job. Loaded this up an now it shoots less than 1 MOA.



I've got some pet loads for 7 mag with 145 gr. Speer Grand Slam, 160 gr. Grand Slam for my Browning 1885, but I don't remember the data.

[TXraiderTK]

Ttt

[TacticalCowboy]

Any loads for 223 75gr hornady hpbt using varget or 8208xbr?

23.7 of varget out of an 8 twist.

[Gunnyart]

I dont have my data in front of me but my latest fun load for my single shot 300BLK is 150 grain flat nosed .357 plated (not jacketed) pistol bullets over 5.6 grains of Trailboss.
Mouse fart quiet suppressed.

[TacticalCowboy]

I dont have my data in front of me but my latest fun load for my single shot 300BLK is 150 grain flat nosed .357 plated (not jacketed) pistol bullets over 5.6 grains of Trailboss.
Mouse fart quiet suppressed.

Uuuuuuh... how are you launching a .357 bullet through a .308 barrel??

[bearintex]

I dont have my data in front of me but my latest fun load for my single shot 300BLK is 150 grain flat nosed .357 plated (not jacketed) pistol bullets over 5.6 grains of Trailboss.
Mouse fart quiet suppressed.

I assume that .357 is a typo?