Reloading 6.5 Creedmoor

[Radar]

Research R26, it might be a good fit.

Yes, 140 gr bullets and RL26, Rem 71/2 primers I achieved 3000 fps. Too hot for me, was showing ejector marks on case head. Backed off to around 2930fps, SD of 7 and was not bad, this would be the high end accuracy node. Low end accuracy node was 2780fps. 26 inch barrel APR rifle. Berger has RL26 data.

RL26 is temp sensitive powder. RL17 and H4350 seem to be the go to powder.

Forgot Lapua brass and loads were compressed. Used a drop tube to dump powder.

[meltingfeather]

Hornady brass has been good to me... though I haven't been through the multiple loadings with the Creed... will keep an eye out for primer pockets loosening up.

[coop2564]

Nosler brass. I use RL26 2878 fps from 22” HMR

[chrisk]

https://m.youtube.com/playlist?list=UUQ7ZytKrmCQnRp9L***inJQ

This guy has tons of reloads for the creedmoor

[Radar]

Nosler brass. I use RL26 2878 fps from 22” HMR

I just bought starline brass with small primer pocket. Gonna try loading some Sierra game changers with RL 26