Reloading 101 for TBH'rs?

[Maui-diver]

Good morning everyone,

Since I'm nearly complete with all the basic set up goodies in reloading and still have a some time waiting on my SBR 11" (300 blackout from Primary Weapon Systems) and Omega 30 cal suppressor, I thought to hollar out to any 300 blackout subsonic reloaders in the Austin area? I've never done anything like this and thought it would be beneficial to hook up with someone who is skilled. I'll also be reloading for my 30-30 and 243. I'll gladly pay you for your time.

I've been seeing a lot of reloading sales on the site lately and also questions about it so thought I would ask here.

TBH Reloading Class

[Maui-diver]

I'll be heading to work in a few and wont be able to reply until i get off at 11pm

[scott.str]

Not in Austin but reload alot of 300blk out 6.5creedmoor and 45acp

[BlackHogDown]

Just started the sbr process for a 300 BO / sup as well. End goal is to reload for it. Tagged...

[Maui-diver]

TTT for a reload 101 course. Will buy you beverages of your choice, pay ya for your time, looks like I can drive out of Austin area for a get together? Anyone else?

[Wits_End]

Do you need help in any specific area or with everythi ng? I've reloaded 300blk but im up in dallas. Id say its an easier round to reload.

[lodgepole]

Reloading 101 for TBH'rs?

Wish I were closer. Been reloading since I was 12, with my Dad of course. I will say it is fairly simple with just a few things to watch out for. If you can buddy up with someone who has experience that would be best. If not it is easy enough to learn.

Advice for newbs:

1-get a couple reloading manuals for reference. I have Hornady, Siera, and Berger.

2-lots of “how to” videos on you tube. Watch several, then watch them again.

3-take notes. Build a step by step guid from the information off of the videos.

4-go slow, take your time and double check everything.


Sent from my iPhone using Tapatalk

[LWD]

Wish I were closer. Been reloading since I was 12, with my Dad of course. I will say it is fairly simple with just a few things to watch out for. If you can buddy up with someone who has experience that would be best. If not it is easy enough to learn.

Advice for newbs:

1-get a couple reloading manuals for reference. I have Hornady, Siera, and Berger.

2-lots of “how to” videos on you tube. Watch several, then watch them again.

3-take notes. Build a step by step guid from the information off of the videos.

4-go slow, take your time and double check everything.


Sent from my iPhone using Tapatalk

This. Read the sections in the front of the reloading manuals and you will learn everything you need to know. Then, re read the a few times and watch some videos. Then go slow the first.

LWD

[scott.str]

If you need you can message me with questions and i can help out a bit. i have reloaded a bunch of different 300 blk out loads. mainly do subsonic now

[mzurovec]

I'm in Liberty Hill and have been reloading .300 black for about 6 months. I'd be happy to show you what I know. With that said, I'm waiting on a Thunderbeast Ultra 7 for mine and haven't done any subsonic yet. We could put some loads together and hit the range and see what we come up with.

[kmon]

Subsonic load workup is a bit different than supersonic load workup. Start supersonic and work your way down, there are a few good powders for this Trail boss and Reloader 5744 are a couple that are often used with most seeming to prefer Trail boss, or at least the ones I know.

Good suggestions above for getting started, ABCs of reloading is another good book to learn from. Cabela's stores usually offer beginning reloading classes (kind of Infomercials to sell you something) but you can get some good information free from them. Like some others have said if I were closer would be glad to show you the ropes of reloading, have only been at it 40 years.

[ltljohn]

Caution!

That is the KEY to reloading. No distractions.
Also I would like to caution about YouTube experts on reloading. (Just my humble opinion) MOST of the videos that start with something like "I just purchased a reloading set up and wanted to tell you how to do it," skip to another. Look for the guys that have a bench with a lot of stuff around it. Stuff like reloading dies, presses, powder and components. These are "usually" older guys.

I have been reloading since 1975. A lot of rounds processed and only one problem of note. I was trying to let a friend learn and he was in to much of a hurry to learn the "one step at a time" method that I prefer and grabbed a cartridge with no powder and seated a bullet. That is a problem!

That being said, reloading for me is a relaxing, enjoyable way to take control of end results of something I enjoy. Shooting and hunting. (It is also addicting)

ltljohn

[Maui-diver]

Just now saw these replies, thanks much yall, will pm a couple of you

[slomo]

A word of caution if loading subsonic and you plan on using a suppressor. Test the rounds without the suppressor on the rifle first. Check your target and make sure your bullets aren’t tumbling/keyholing . The last thing you want is a baffle strike.

[FFLMike]

Read all of the above and read it again, LOL

Been reloading for a while. First thing I'll tell you is; I would never shoot reloads that I didn't personally load. Second: I would never reload for someone else. Lots of liability I am not willing to subject myself too. Never know what people might do.

That being said, reloading is fun and safe if you are patient and pay attention to what you are doing. Never exceed the maximum or minimum loads in the manuals you are using. Keep your equipment clean and working properly. You can learn a lot from youtube, but also be aware that there are idots making youtube videos too. Common sense should prevale.

Never reload when you are in a hurry. Take your time and be very carefull. I always use a single stage press now. I reload rifle cartridges for accuracy, not cost.