DPMS barrel break in procedure

[huntandfishguy6]

What are your thoughts on the DPMS barrel break in procedure ? It sounds time consuming, but I do want the best possible accuracy from a factory lr 308 barrel.

[LWD]

What's the procedure?

LWD

[huntandfishguy6]

Clean chamber, and bore after every round for the first 25 rounds. The next step is clean bore after every 10 rounds for the next 100 fired.

[TacticalCowboy]

I'd shoot five, clean it, shoot 20 more, clean it, and call it good.

[DarrellS]

Shoot it until accuracy drops of, clean and shoot it some more.

Sent from my SM-G930V using Tapatalk

[Zen Archery]

Ugh... here we go. Clean bore get factory junk out. Start shooting it and clean it when it starts losing it's zero. Break in is a myth.

[gatorgar]

I cleaned it out. Shot 10 rounds. Cleaned it. Had my buddies blast off a box. Cleaned it and then sighted it in with the remaining 10 rounds from my box. 2 shots at hogs, 2 hogs dead. Still have 3 round left.

Sent from my SM-G920T using Tapatalk

[randal]

Shoot 100 round drum thru it as fast as you can..

[elkaholic9292]

I had a bench rest pro build my rifle. He told me to get out and shoot my new rifle, don't worry about it.

[LFD2037]

I cleaned it out of the box/lubed BCG, shot it 20 times, cleaned it/lubed BCG, shot it another 50 times, cleaned/lubed BCG again. Won't clean it again for another 200-300 rounds, lube BCG as needed.