Stuck round in my AR

[dxtbowhunter]

I have a live round. Pin hit the primer. I can see the spit it hit. The whole thing is stuck in there. I need help getting it all out. This is on a 300 blk out.

[shwacker1911]

Assuming It did not go bang you should be able to get it out with a wooden Dowell rod and a hammer had a 556 do it and just taped it out

[dxtbowhunter]

Was no bang

[shwacker1911]

Then it should just tap out the one I had was a reload the the shoulder was to weak and when it fed in it crushed but was still able to get it out with the on the cheep wooden rods walmart sells in there arts and crafts area

[gumbl3]

Mortar it

[AgBass01]

Assuming It did not go bang you should be able to get it out with a wooden Dowell rod and a hammer had a 556 do it and just taped it out

Yup, I've had to do this before as well. Tap it out backwards.

Sent from my SAMSUNG-SM-G890A using Tapatalk

[tvc184]

Mortar it

Collapse the stock (if it is that style) and in in case, slam the stock on the ground a couple of times.

[mechhead]

Collapse the stock (if it is that style) and in in case, slam the stock on the ground a couple of times.

This...^^^^^


Sent from my iPhone using Tapatalk

[lbbf]

Don't lean over the barrel if banging the stock on the ground. Probably near 100% it won't go off but not worth the chance.

[dxtbowhunter]

Got it out with a dowl rod. Layed it done and tapped the dowl with a hammer. The casing was missed up. I did catch it before loading it. Thanks everyone.

[Tom]

no matter what you do...wear eye protection at a minimum when messing with it

[dxtbowhunter]

no matter what you do...wear eye protection at a minimum when messing with it

Oh I did. Even had the barrel point in a safe direction. I just cycled seven rounds through it.