Announcement

**Reaper33** · 02-25-2016, 10:23 AM

As far as I know there should be no issues. A G19 slide is a G19 slide regardless of the cuts on it. But who knows I could be completely wrong

**Reaper33** · 02-25-2016, 10:29 AM

if you get one though, let me know how you like it. I have a G23 and a dang trijicon RMR that has been sitting in the safe for over a year now.

**WCB** · 02-25-2016, 10:29 AM

Originally posted by Reaper33 View Post

As far as I know there should be no issues. A G19 slide is a G19 slide regardless of the cuts on it. But who knows I could be completely wrong

I was wrong once...

**imyomama** · 02-25-2016, 10:48 AM

only if they are the same gen .. if you have an older gen glock , i wouldn't ... plenty on info on the web ..

**Reaper33** · 02-25-2016, 10:50 AM

Originally posted by WCB View Post

I was wrong once...

haha

**WCB** · 02-25-2016, 12:04 PM

Originally posted by imyomama View Post

only if they are the same gen .. if you have an older gen glock , i wouldn't ... plenty on info on the web ..

I haven't looked yet. Figured I'd let y'all look...

So a Gen4 slide won't fit on a Gen3? Dang the luck. Guess I'll have to buy a new G19 MOS along with the G40 MOS...

**Avezorak** · 02-25-2016, 12:38 PM

Gen 3 upper will fit on a Gen 4 frame, but not vice versa.

Same gen MOS wont be an issue

**LaSouthpaw** · 02-26-2016, 03:34 PM

You can buy a slide milled for a rmr for a gen 3 or have your current slide milled from different vendors.

Can the Glock G19 MOS slide be installed on a regular G19??