Announcement

Collapse
No announcement yet.

6.8 scope help

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    6.8 scope help

    I'm looking for a good scope for my new 6.8, gun with be used for hunting. I ha e a 3x9x40 Nikon on my other gun but wanting a little more. Thanks.

    #2
    Do you need more? I had a 3-18 and it was too much for me. Low power optics like the 3-9 will work fine to 300 where the 6.8 starts to fall off. I might go 4-12 but that's about it.
    Last edited by TexMax; 01-05-2016, 07:36 PM.

    Comment


      #3
      What will your primary use of the rifle be?

      Comment


        #4
        I have the Leupold VXR 4-12x50 firedot on my 6.8 and its great

        Comment


          #5
          MTAC 1-4. The perfect scope for an AR.

          Comment


            #6
            I would look at a Primary Arms 1 to 8 power mil

            Comment


              #7
              I run two different scopes w/Larue quick detach mounts on mine, I switch them out depending on what I'm hunting.
              I have a Zeiss conquest 3.5x10 ( I think) I also run a Trijicon 1x4...


              Sean, is that Primary arms a true 1x ?

              Comment


                #8
                I have a 3x9x40 Leupold VX-1 on one 6.8 and a 4.5x14x40 Leupold CDS on another.

                I prefer the 3x9x40.

                I feel it is better in low light and like the clarity when looking at something close when comparing between the two.

                Comment


                  #9
                  What round and gr do yall like shooting deer with it?

                  Comment


                    #10
                    Originally posted by Bily Lovec View Post
                    I run two different scopes w/Larue quick detach mounts on mine, I switch them out depending on what I'm hunting.
                    I have a Zeiss conquest 3.5x10 ( I think) I also run a Trijicon 1x4...


                    Sean, is that Primary arms a true 1x ?
                    this is what I did when I was limited to 1 AR

                    Comment


                      #11
                      Originally posted by bboswell View Post
                      this is what I did when I was limited to 1 AR
                      LOL
                      Im not limited to one AR

                      the larue mounts hold a true zero between numerous ARs and optics. I also run the 1x4 and an Aimpoint T1 on my 300BFD depending on useage.

                      Comment


                        #12
                        Originally posted by Bily Lovec View Post
                        LOL
                        Im not limited to one AR

                        the larue mounts hold a true zero between numerous ARs and optics. I also run the 1x4 and an Aimpoint T1 on my 300BFD depending on useage.
                        I knew full well you weren't

                        Just saying that was why I went with the QD mounts, so that I could put a scope on to go hog hunt and then replace it with the EoTech when I got home

                        Comment


                          #13
                          Originally posted by Bily Lovec View Post
                          I run two different scopes w/Larue quick detach mounts on mine, I switch them out depending on what I'm hunting.

                          I have a Zeiss conquest 3.5x10 ( I think) I also run a Trijicon 1x4...





                          Sean, is that Primary arms a true 1x ?

                          I think so Randy. He has a video review of it on his YouTube channel.

                          Comment

                          Working...
                          X