thread protector

[boomer453]

question-would it be possible to have a thread protector made for a barrel just by sending a gunsmith the muzzle brake or would he need the rifle itself?

Need one made-tried two different ones from brownells but the threads don't match.

[Graysonhogs]

I always like to have mating pieces when I make anything. You can make your part perfect, but sometimes the mating part is a little off. Saves a lot of headache. I'd find a local machine shop and do it that way.

[Stan R]

I think Barrel threads should be pretty standard?

My rifle if 5/8 x 24

My AR is 1/2-28


Did the threaded barrel come from the actory or where they done by a gunsmith afterwards?

[RevMS]

There are several standard sizes ... you should only need to measure the thread and pick the right size. I know nothing about this manufacturer, but they list 8 different thread sizes on their Amazon listing of their thread protectors.

http://amzn.to/1SDLwzk