What Powder to use reloading 22 - .250

[stevieray54]

Have a 1:18 twist barrel using a Hornady 50grain Vmax bullet with Federal match grade primers..Any suggestion or exprince i which Hodgon or IMR you have used..

[hardtner]

I use IMR 4350 under 55 gr partitions in a 14T

[smokin feathers]

H380 always works well in 22-250's for me

[bustacap]

H380 always works well in 22-250's for me

Me too

[tx07]

Have a 1:18 twist barrel using a Hornady 50grain Vmax bullet with Federal match grade primers..Any suggestion or exprince i which Hodgon or IMR you have used..

Not being a smart tail by any means.
But do you have any reloading books? You can't have too many when you reload. Personally I have 4.
Pretty much everything I reload is in at least 1 of the 4. Also online, you can find a lot of good stuff as well.

I guess your trying to possibly work up a custom load?

[CWendling]

H380 was made for the 22-250. 38.0 gr under a 50gr bullet is a standard varmint load

[dustoffer]

H380 pushing 55-gr Ballistic Tips

[dclifton]

Varget and 8208 here.

[kmitchl]

Good timing. I just finished a 22-250 build and will be at the range in the next few days. Run a few rounds for barrel break in and then start load development.

[txhoghunter73]

Varget

[M16]

Varget

[DarrellS]

Mine loves H380

[stevieray54]

Thanks guys…Any more suggestion would be appreciated Stevieray

[Rswan13]

I'm still doing some load testing but I've been using 4064 with some decent groups on the low end while I'm working up to higher charges.

[Cajun Blake]

Have a 1:18 twist barrel using a Hornady 50grain Vmax bullet with Federal match grade primers..Any suggestion or exprince i which Hodgon or IMR you have used..

are you 100% certain .... 1:18" twist ?

did you mean 1:8"