Alright guys I have a question. Put together an ar to play with. I am running a lj wylde chamber 1:8 twist. I put a seekins adjustable gas block and I am running a thunder beast can on it. I have only shot nosler varmageddon 64 gr hollowpoints out of it. These are all factory loads. I have only shot one box and I have noticed on some of the spent cartridges that the primer is gone. Is this from something I have done. It's has happened on 4 rounds. All others look good. No flattening or pierced primers. Gun shoots great. I'm just making sure I am not missing anything. I know if it was reloads then to check the pressures. Could it be on this batch of ammo the primer pocket is just a little to big? Any input is great. Thanks in advance.
-
-
I would think it's something with the ammo. Do the cases look dented in the back of them like they are slamming the bolt? Unless the adjustable gas block is causing that???
I'm no guru though.
Look over this article
Last edited by tx07; 08-26-2015, 07:02 PM. -
Nope cases look great. I was thinking only thing could be gas block but I thought gas block would just be responsible for cycling.Comment
-
It is a little more involved from what I was reading. You can wear out your gun pretty fast if it's not right. Read that link brother.Originally posted by onetondodge View PostComment
-
Anyway with any ideasComment
-
Try different ammo and see what happens.Comment
Comment