300 RUM Load

[bboswell]

I have 7828sc & H1000

Which should I start with?

[Randy]

Get with Jason Sutton he has been working hard on the rum loads.

[TacticalCowboy]

https://Www.hodgdon.com

[Drewboy22]

Get with Jason Sutton he has been working hard on the rum loads.

That's what she said

[texag93]

Send me a pm with your number. I have lots of info.

[WyoBull]

I load a lot of ammo for my 7mm RUM using Barnes bullets. I use H1000 exclusively. It is a great powder for my gun. I can't help you with the 300 but if you are using Barnes Bullets, they have some good load information on their website but if you will call them, they will send you an even more extensive selection.

[bboswell]

Thanks WyoBull. I like Barnes on shorter range rigs.

[drjudd]

89 grains of Retumbo with the 210 Berger VLD hunter. 3040 ft per second out of a 28 inch barrel. Mine is money to 900yards. I can get you measurements if you need.

[bboswell]

89 grains of Retumbo with the 210 Berger VLD hunter. 3040 ft per second out of a 28 inch barrel. Mine is money to 900yards. I can get you measurements if you need.

What brass / primer are you using?

[Randy]

What brass / primer are you using?

I'm pretty sure he is using Remington and Nosler brass with CCI magnum primers.

[bboswell]

I'm pretty sure he is using Remington and Nosler brass with CCI magnum primers.

and that is why I asked, I have heard there is a big difference in the quality of the 2 brands which leads to an accuracy advantage and less prep work on 1 of them.

[WyoBull]

Thanks WyoBull. I like Barnes on shorter range rigs.

Have you tried the Barnes LRX bullets for longer range applications?