Can Anyone in Keller/Watauga area help me with AR handguard removal/instal

[Kankles]

I need help removing a bone stock Colt 6920 handguard, FSP, delta ring and barrel nut to install a LaRue 7.0 free float carbine rail. Can anyone near me help?!? Will provide refreshments....

[iamntxhunter]

IF you are wanting to save the delta ring and nut then just cut it off with a dremel tool if you have one. There are several videos on youtube if you want to look at trying to do it yourself. If I was close I would help you.

[Mike D]

IF you are wanting to save the delta ring and nut then just cut it off with a dremel tool if you have one. There are several videos on youtube if you want to look at trying to do it yourself. If I was close I would help you.

That won't work on the Larue. You have to use their barrel nut.

[Kankles]

Can Anyone in Keller/Watauga area help me with AR handguard removal/instal

IF you are wanting to save the delta ring and nut then just cut it off with a dremel tool if you have one. There are several videos on youtube if you want to look at trying to do it yourself. If I was close I would help you.

Yea I'm not worried about keeping the old nut and delta ring... I can probably do it all except for the barrel nut removal and installation... I guess really what I'm needing is a upper receiver block that someone can lend me since I have the AR wrench

[6.8mmSPC]

I have an upper receiver block but I'm in South Arlington. If you don't find one closer let me know.

[Kankles]

I have an upper receiver block but I'm in South Arlington. If you don't find one closer let me know.

Appreciate it

[Mike D]

Yea I'm not worried about keeping the old nut and delta ring... I can probably do it all except for the barrel nut removal and installation... I guess really what I'm needing is a upper receiver block that someone can lend me since I have the AR wrench

You really need a torque wrench to install it properly as well.

[Kankles]

Can Anyone in Keller/Watauga area help me with AR handguard removal/instal

You really need a torque wrench to install it properly as well.

Have a torque wrench also.. just no dang upper receiver block or vise...

[philcam]

We need an AR building party!

[DorothyNotKeegan]

Jesse and Mike are good people!

[Kankles]

We need an AR building party!

I agree!

[Kankles]

Got this far...

[Kankles]

Ttt for bed