Originally posted by BLACKFINTURKEY
View Post
Announcement
Collapse
No announcement yet.
How about a trade thread for reloading components.
Collapse
X
-
Looking for 6.5 creedmoore dies and components I have the following to trade.
RCBS 300 blackout dies (small base) brand new.
Barnes 110 tactx bullets (42)
Sierra Match 125gr (100) flat base for 300bo
Almost full pound of H110
88ct FGMM brass that has been fully prepped and primed with federal 210 match primers
RCBS .308 dies
Sierra Match king 168gr. (100)
Sent from my SM-N960U using Tapatalk
Comment
-
Originally posted by KLAPPER View PostLooking for 6.5 creedmoore dies and components I have the following to trade.
RCBS 300 blackout dies (small base) brand new.
Barnes 110 tactx bullets (42)
Sierra Match 125gr (100) flat base for 300bo
Almost full pound of H110
88ct FGMM brass that has been fully prepped and primed with federal 210 match primers
RCBS .308 dies
Sierra Match king 168gr. (100)
Sent from my SM-N960U using Tapatalk
I’ve got some FC Creedmoor brass you can have. It’s not a lot, but good brass, once fired, then I deprime and tumble.
How much ya want for the TAC-TX bullets and H110? I’m always looking for more
I went to the woods because I wished to live deliberately...
Henry David Thoreau
Comment
-
I got a couple of pounds of IMR 4064 and some 7MM 145 gr. Speer BT's I can get ride of.
I also have 2K Remington 209-4 primers. The're for .410 if anyone loads that bore. I haven't loaded any in years and probably won't.
I have a buttocks load of 12 ga hulls and wads that I need to get rid of as well if anyone is interested. I'll take an inventory of that stuff and post it this weekend.
Comment
-
Originally posted by SabreKiller View PostI got a couple of pounds of IMR 4064 and some 7MM 145 gr. Speer BT's I can get ride of.
I also have 2K Remington 209-4 primers. The're for .410 if anyone loads that bore. I haven't loaded any in years and probably won't.
I have a buttocks load of 12 ga hulls and wads that I need to get rid of as well if anyone is interested. I'll take an inventory of that stuff and post it this weekend.
What kind of hulls and wads?
Sent from my iPhone using Tapatalk
Comment
-
Originally posted by Blood Trail View PostWhat kind of hulls and wads?
Sent from my iPhone using Tapatalk
I'll have to take inventory this evening. I"m pretty sure I've got several hundred 12 ga AA hulls, several hundred Federal 12 ga paper hulls and the wads are all over the spectrum.
I also have an extra set of 38/357 Lee dies that I didn't realize I had.
Comment
-
Originally posted by SabreKiller View PostI got a couple of pounds of IMR 4064 and some 7MM 145 gr. Speer BT's I can get ride of.
I also have 2K Remington 209-4 primers. The're for .410 if anyone loads that bore. I haven't loaded any in years and probably won't.
I have a buttocks load of 12 ga hulls and wads that I need to get rid of as well if anyone is interested. I'll take an inventory of that stuff and post it this weekend.
Comment
Comment